Beschreibung

• Please notice , This PCB control board can only use the remote control in our photo, it can't be used with different distant controls Specifications: 1 Material: High-quality PCB Board 2 Power supply: AC 24V, Available for adding 24V backup battery three Application: Used for double or single DC 12-24V gate opener four Encoder For transmitter: 433 rolling code 5 Allowed Transmitters Quantity: Up to 120PCS 6 Speed -adjustable operate 7 Auto closing/opening,opening/closing postpone time adjustment 8 Adjustable Residence sensitivity 9 out there for loop detector, photocell, push button, keypad, access management kit 10 Digital LED Menu brings a smooth setting, plug and play 11 Open/Close unmarried leaf or double leaves 12 Total 60&;s operating time to protect the motors Technical Parameters: 1 panel voltage input: 24VDCAC Can join 2PCS 12V 9AH again up battery Note that the management board purchased individually needs to be used with a transformer, and can't be directly 100-250V AC 2&;s voltage: 12-24VDC support input of the control board is 24V, and the output is 12-24V three for transmitter: Use our own personalized rolling code(Encrypted code, no copying and non-branding of our products ) 4 of application: Suit for our double palms swing gate openers *The Linear Spiral 24V Straight Brush Arm is supported, yet solely solely works with our products, and is not coated through the guaranty if examined on a non-ours product Functions and testing: 1 MOTOR 1: Master gate, close first & open last terminal join 1st purple twine (counted out of your left hand facet to right hand side) 2 MOTOR2(DELAY) : Slave gate, open first & close final terminal join 1st blue cord (counted out of your left hand side to appropriate hand side) NOTE! If you just have a single gate, the motor only can hook up with the Motor 2 Delay terminal 3 2 SIDE: It is for connecting to any exterior machine that operates a double gate four COM:It is for connecting to the “ floor ” 5 1 SIDE: It is for connecting to any external device that operates the one gate 6 Swipe Card: It is for connecting to any external instruments to open the gate 7 COM:It is for connecting to the “ floor ” external machine 8 IR: Infrared terminal is for connecting to the security beam 9 12V: The output is for connecting to the photocell sensor, continuous output recent <=200mA (24V DC output, latest is 1A) 10 24Vbattery +: It is for connecting the backup battery + 11 24Vbattery-: It is for connecting the backup battery- 12 24V: 24V DC output is for connecting to an external system (such as photocell sensor, max latest output 1A) thirteen GND: It is for connecting to the “ floor ” of an external gadget 14 24VLAMP+: It is for connecting to the flash gentle + 15 24VLAMP-: It is for connecting to the flash light- 16 LOCK(NF): The NF terminal which used for connecting to the electrical lock 17 COM(24V): COMMONused for connecting to the“ground”of the lock 18 LOCK(NA): The NA terminal which used for connecting to the magnetic lock 19 GND: It is for connecting to the “ floor ” of the alarm formula 20 SP: It is 24V DC output connecting with the alarm method 21 AC 24V:It is for connecting with the transformer 22 Digital display: It is for showing you the atmosphere data 23 INC+: It is for figure growing of setting the information 24 FUN: Used for input the menu setting and make sure the data 25 DEC-: It is for determine lowering of atmosphere the info 26 Learning button: It is for programming/erasing the handheld remote control 27 ANT and GND: used to connect to antenna

• 
• 
• 
• 
• 

Rückmeldung