विवरण

• LED Dimmer 220V AC Triac Dimmer 230V 110V Wireless RF Dimmable Push Switch with 2 Remote Dimmer for LED Lamp 220V Bulb S1-B AC Triac Push Dimmer +RF Remote Control (LSD-S1-B+R1 Set)RF dimming/Leading edge or trailing edge/Min brightness settable/Push Dim/Wall junction subject mountingFeatures● RF + Push AC phase-cut dimmer, 1 channel output.● To dim and switch unmarried shade dimmable LED lamps, usual incandescent and halogen lights.● Leading edge dimming or trailing edge dimming set by dip switch.● Min brightness could be set by means of approach of key.● Compatibility with RF 2 dimming remote control.● Light on/off fade time 3s selectable.● Connect with exterior push switch to realize on/off and dimming function.● Easy to be inserted into steady 86*86mm wall field ParametersTriac Dimmer S1-BInput voltage: AC100-240VOutput voltage: AC100-240VOutput current: Max 1 power: 150W-360WInput signal: RF 2 + Push DimRF Control distance: 30mDimming level: 256 levelsDimming range: 0 -100%R1 RF RemoteOutput signal: RF(2)Working voltage: 3VDC(CR2032)Working current: ＜5mAStandby current: ＜10μARF Control distance: 30m(Barrier-free space)How to Match Remote Control?End consumer needs to be pair the remote to the receiver earlier than using,the steps as follows: *** Match: Short press match key, straight press on/off key of the remote. *** Delete: Press and keep event key for 5s to delete all match, The soft blinks 5 occasions ability all matched remotes have been deleted form of Lamps compatiable with ?● Dimmable LED lamps, Maximum load 200W @ 220V, 100W @ 110V, Due to style of LED lamp designs, most number of LED lamps is extra looking on energy ingredient outcome when linked to dimmer. ●Triac Dimmable LED drivers,Maximum load 200W @ 220V, 100W @ 110V, Maximum approved style of drivers is 200W divided via driver nameplate calories rating, and make sure the surge current isn't any greater than 2 instances 65A. ●Incandescent lights and HV Halogen lamps, Maximum load 400W @ 220V, 200W @ 110V brightness settingLong press Min set key for 2s, the sunshine blink 2 times, watching for min brightness set, then brief press Min set key 1-6 times,to get 6 min brightness: 5%, 10%, 15%, 20%, 25% or 30%, the light will output the current min brightness immediately,Long press Min set key for 2s or wait 8s, quit min brightness set, the light will output one hundred pc brightness mechanically on/off fade timeLong press Match key 5s, then quick press Match key three times, the light on/off time can be set to 3s, the indicator gentle blink three times press Match key 10s, fix factory default parameter, the light on/off time also restore to 0.

• 
• 
• 
• 
• 

समीक्षा