United States ülkesine gönderilen ürünleri gösteriyoruz. Farklı bir ülkeye gönderilen ürünleri görmek için teslimat bölgenizi değiştirin.














[xlmodel]-[custom]-[8888] Description H743-WING-V2(Purple PCB) has been up to date to V3(Blue PCB) since end Apr IMUICM42688-P(V3)+ICM42605 instead ofMPU6000(V2)+ICM42605 Same functions, layout, wiring schematic & I/O mapping More details, pls read Tips & Notes 1x H743-WING 1x USB(Type-C)/Beep (Passive buzzer) Extender 1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender 2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C port 1x Rubycon ZLH 35V 470uF capacitor Dupont 2 pins (Board is distributed unsoldered) Including Mounting: 30 x 30, 4mm with Grommets 3mm Dimensions: fifty four x 36 x thirteen mm Weight: 30g with USB extender Physical Linear Regulator Continuous current: 200mA BEC 3 output Designed for Servos Voltage adjustable, 5V Default, 6V or 7 via jumper Continuous recent 8 Amps, 10A Peak BEC Vx output Designed for Video Transmitter, Camera, Gimbal ect Continuous recent 2 Amps, 3A Peak 12V choice with Jumper pad BEC 9V /12V output Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed Output 5 +/- 0 DC Continuous recent 2 Amps, 3A Peak BEC 5V output Input voltage range: 8~36V (3~8S LiPo) w/TVS protection 2x ESC strength pads Current Senor: 220A, 3 ADC (Scale 150 in INAV, sixty six A/V in ArduPilot) Sense resistor: 90A continuous, 220A height PDB ArduPilot(ChiBiOS): MATEKH743 INAV: MATEKH743 FC Firmware MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash IMU: MPU6000 (SPI1) & ICM42605 (SPI4) Baro: Infineon DPS310 (I2C2) OSD: AT7456E (SPI2) Blackbox: MicroSD card slot (SDIO) 7x Uarts (1,2,3,4,6,7,8) with built-in inversion 13x PWM outputs(including LED pad) 2x I2C 1x CAN 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2) 3x LEDs for FC STATUS (Blue, Red) and three indicator(Red) 1x SPI3 breakout USB/Beep Extender with Type-C(USB2) Dual Camera Inputs swap 5V/9V(12V) for Camera/VTX strength swap High-precision Current Sense (90A continuous, 220A peak) Battery Voltage Sensor: 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT eleven in ArduPilot) ADC VB2 voltage divider: 1K:20K ADC AirSpeed voltage divider: 20K:20K Static strength 160mA@5V [xlmodel]-[photo]-[0000]





QWQER Express,
USPS,
DHL