说明

• Descriptions EACT25A House hold AC contactor is principally designed for AC 50Hz or 60Hz circuits with 230V working voltage in AC7a utilization ,rated working voltage up to 230V, rated operating latest up to 25A, Rated working voltage in AC7b utilization , rated latest to 10A Using in breaking potential beneath 6kA circuit For distance join or wreck the circuit Application :for home, apartment, hotel, computerized cut off or connect the power *2NO: 2 Normally Open Contact *1NO1NC: 1 Normally Open + 1 Normally Close Contact *2NC: 2 Normally Close Contact Normal working and set up situations Ambient temperature:-5°C to +40°C,the common temperature no more than +35°C in 24 hours Altitude:no more than 2000m Atmospheric conditions: the relative humidity of the installation place needs to be no more than 50% when the maximum temperature is +40°C:if below a decrease temperature,a increased relative humidity is permitted The monthly common minimal temperature within the wettest month shouldn't exceed +25°C and the monthly common most relative humidity of this month no more than 90%,the dew on the floor of goods brought on by temperature replace should be taken under consideration Class of pollution: class 2 Installation condition: category II Application instruction 1 Check whether the contactor consents with the scope of software and the operating condition before installation 2 During the method of putting in pull down the movement stopping factor and put the contactor on the safe orbit then push up the motion,stopping ingredient to fix the contactor at the secure orbit keep away from loosening and shedding pull down the motion,stopping aspect if you wish to remove the contactor Caution a) sure the proper mode of connection b) down the binding screw in the course of the connection

• 
• 
• 
• 
• 

审核