说明

• FYSETC High Temperature NEMA14 36mm Motor Stepper motor For Sherpa Mini Extruder Voron 2.4 Note： 1) The drive current of the extruder needs to be adjusted to 0.35A (method: adjust the voltage to about 0.28-0.3V or adjust the E-axis drive current by firmware) Adjust the current Reason: to prevent the motor from overheating 2) Modify the extruder pulse method Method 1: The firmware modifies the extruder pulse: #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 665 } Method 2: Send G code (can be sent by slicing software command): M92 E665 M500 3) Reduction ratio of extruder: 7.5:1

• 
• 
• 
• 
• 

审核