Three-phase electricity meter, electronic, equipped with LCD display High quality, low weight, small product dimensions Designed,
manufactured and tested in keeping with foreign criteria
The fundamental points of the product are: quite a lot of voltage measurement, excessive accuracy, reliability, resistance to overload, energy consumption is very low The meter permits measurements of energetic strength Three LEDs reveal the presence of every part Measurement of active energy over an extended era of time with out the need for calibration It has an internal connection for current and voltage size
Work rules: The voltage and latest are sampled from the respective circuits and converted into a signal that's fed to the incorporated circuit Themeter has an impulse output for testing, with a pulse width:80+20ms
To preserve the meter opposed to external climate conditions, it can be put in in a box
TECHNICALPARAMETERS:
-Type:3-phase,
- Max current: 10(100) A,1(6)A
- Power consumption:<2W/10VA,
- Voltage: 3x120/208V, 3x220/380V, 3x230/400V,
- Frequency: 50/60 Hz,
- Display:LCD 6+1 (999999,9 kWh),
- Degree of protection: IP20,
- Pulse frequency:1000imp/ kWh,
- Normal voltage range:90%Un~110%Un,
- Limits voltage range:70%Un~120%Un,
- Installation: for DINrail,35 mm
WARNING:
-The meter needs to be installed by a certified person,
- The meter ought to be installed at a top of about 1,
- Installation must be in line with the relationship diagram
below The most cross-section of wires:35mm?
- The meter ought to be installed in a suitable environment with an
ambient temperature fluctuate of -25"~ +55" and relative humidity
under 75%