Features:The 1064NM 2W engraving laser makes use of tremendous imported laser diodes with lengthy provider life, stable output power, clean mild spots, and makes use of a 12/ 24V DC fan with nice warm temperature dissipation impression and occasional strength consumption. This product can be utilized to carve copper, aluminum, bamboo and wood, leather, crystal, metal plate, rubber plate, resin, etc:Can Engraved aluminum and copperProduct parameters:product model FFJG1064-2WR1
wavelength 1064±1nm
calories >2W
pulse width ≈8ns
frequency 20-30 kHz (uncontrolled)
power supply DC 12V≥8A/ DC 24V≥4A (80W)
light output management The PWM laser outputs the optical signal input pin, and uses a 3-5V level. The immoderate point outputs the laser and the low level turns off the laser. The red indicator mild and the laser state are opposite.
focal length 25mm
Structural size 50*50*140mm
working temperature 20-30°C
garage temperature -10℃ to 50℃
cooling substances Air -coolingprecautions for use1. The laser emitted via the laser module has a safety point of ClassIV and might trigger harm to eyes. When the laser module is working, it's strictly prohibited to immediately examine its end face and put on protective glasses.
Recommended glasses:
2. The device requires an appropriate driving calories supply. When the laser module is connected to the power supply, the power delivery output voltage ought to be zero; when adjusting the current, it will be elevated or lowered slowly to bypass the inrush recent unfavorable the device.
3. The formulation needs to be kept or worked in a dry surroundings with a dirt ranking of one million, so that the lens must be avoided from falling into dust and affecting the light spot.
4. Working at increased temperatures will increase the edge current, lower conversion efficiency, and speed up gadget aging.
5. Operating with output power greater than specified parameters will speed up gadget aging.
6. During continual operation, the laser tube temperature reaches 70℃, and heat dissipation ought to be played well.
7. This product is a static touchy formulation and may solely be taken when the human body is definitely grounded. Anti-static bracelet can be utilized to forestall static electricity.