विवरण

• Normal Open 12V 24V Engine Flame Out Device Off Valve XHQ-PT- NO The look of regular close and typical shut are the same, just difference: normal open stype:NC （）,When power on, it will pull when strength off, it's going to push common close stype:NC （√）,when energy off ,it will pull When strength on,it will push One: technical parameter The objective of operating voltage: 12V (9-15V DC) 24V (18-30V DC) Purpose: 12V-2 24V-1 (full of action recent moves in place robotically disconnect the power supply, the operating latest of <15mA) In the road of control operating current: <15mA Travel: fifty three + 1mm The most tension: 90N An ambient temperature: -30 to 60 DEG C The action time: less than 2 seconds An overload protection extinguisher: the weight is just too large or stuck, quit working automatically,avoid flameout system injury Disconnect the ability off after a era of time, re power,extinguisher from fault reset, can resume normal paintings Two, flameout device wiring: The flameout device has 3 lead wires, as follows: Red: join the effective power supply: the cathode of an influence supply (yellow inexperienced or blue)as the road of control: Open type: management line energy extinguisher action, action in place, automated give up The release of extinguisher power, action in place, computerized stop Closed type: management line energy extinguisher action, action in place, automatic give up extinguisher power management line, computerized quit motion in place Three, set up and see The installation and commissioning should ensure the extinguisher motion in position before,diesel engine stop control rod no motion to the restrict function and the extinguisher stuck,otherwise the extinguisher inside overload defense circuit, computerized flameout machine stops working, the extinguisher must disconnect the power, regulate the mounting position, again to the extinguisher on electricity, flameout which can resume traditional work

• 
• 
• 
• 
• 

समीक्षा