विवरण

• 1/5/10/20pcs Thermal Grease Paste Conductive Heatsink Plaster Viscous Adhesive Glue For Chip VGA RAM LED IC Cooler SealantDescription:1.It has high strength and quick bonding effect, and is suitable for straight attaching different components, LEDs and heat sinks. 2.Good thermal conductivity, stable adhesion, vacuum packaging isn't always easy to oxidize and dry, good viscosity, brief drying time. 3.It has good conductivity, wide working temperature range (-60~200°C), and momentary resistance to 300°C. 4.It has short surface curing time, lengthy garage period, non-toxic, solvent-free, and can be safely applied to elastic bonding, heat dissipation, insulation and packaging of electronics, instruments, LEDs, heat sinks, etc. 5.Instructions: 1) Extrusion of the product directly during use, rubbing the skin of the adherend, and directly protecting it after use, in case of trial again 2) The surface fixed speed is expounded to the relative humidity and temperature in the air; the better the temperature, the faster the curing speed, and vice versa. 3) Recommended thickness: 0.1-0.5mm, the thinner the better. 4) Please use solvent to clean the outside of the bonded object earlier than use (such as alcohol), avoid cleansing with detergent, and practice it after the outside is clean. 6.The equipment is sealing and the product is roofed with a vacuum bag to insulate the air and increase the garage time.Specifications:Thermal properties, strong glue adhesion. Specifications: 5g (single) Melting amount: zero (200°C/24 Hours) Evaporation: 0.001% (200°C/24 Hours) Thermal Conductivity: >0.671W/m-K Impedance: Ging Time: 3min (25°C) Track Strength: 25Kg Strength of Connected Buildings: 1.5map Margin Coefficient: >5.1 Scatter Coefficient: Package Included:1 x Heatsink Plaster

• 
• 
• 

समीक्षा