विवरण

• If desire Analog Servo, Click the picture under to purchase If want Digital Servo, Click the photo beneath to purchase Note: 1 Servo all steel capacity spindle and gearwheel all is iron made; Half metallic capacity spindle is metal, gearwheel is plastic 2 360 Degree Servo rotates consistently If need to control the angle, plesae desire the choice one hundred eighty Degree Servo three For a hundred and eighty diploma servo, some controllers can't management the perspective accurately; please use a pro PWM Servo Controller to control the angle, as proven within the video: YIDI 1pc Metal Gear MG945 MG995 MG996R Servo Motor 180 360 Servomotor Analog for RC Arduino Robot Toys Model Airplane Mini Car Boat Features: Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS etc Great for truck, Boat, Racing Car, Helicopter and Airplane Power Supply: Through External Adapter Connector Wire Length 300mm Specification: 1 Model: MG945 Dimension: 40mm x 19mm x 43mm Rotation Angle: 0-180 levels Operating Speed: 0/60 degrees (4 no load) Operating Speed: 0/60 degrees (6 no load) Stall Torque: 10/cm (4) Stall Torque: 13kg/cm (6V) Operation Voltage: four - 7 Operating Temperature: zero ℃- 55 ℃ Gear Material: Half Metal/All Metal Dead Band Width: 5msec Operating Mode: Analog Plug Type: JR, FUTABA General Accessories: Multi-arm, Fixing screws(AS the image shows) Connector Wire: 300mm(Brown: Negative; Red: Positive; Orange: Pulse Input) 2 Model: MG995 Dimension: 40mm x 19mm x 43mm Rotation Angle: 0-180°/360°(Continuous Rotation) Operating Speed : 0/60 levels (4 no load) Operating Speed : 0/60 degrees (6 no load) Stall Torque: 9kg/cm (4) Stall Torque: 11k/-cm (6V) Operation Voltage: four - 7 Operating Temperature: zero ℃- fifty five ℃ Gear Material: Half Metal/All Metal Dead Band Width: 5msec Operating Mode: Analog Plug Type: JR, FUTABA General Accessories: Multi-arm, Fixing screws(AS the picture shows) Connector Wire: 300mm(Brown: Negative; Red: Positive; Orange: Pulse Input) three Model: MG996R Dimension : 40mm x 19mm x 43mm Rotation Angle: 0-180°/360°(Continuous Rotation) Operating Speed: 0 / 60 degrees (4 no load) Operating Speed: 0 / 60 degrees (6 no load) Stall Torque: 9kg/cm (4) Stall Torque: 11kg/cm (6V) Operation Voltage: four - 7 Operating Temperature: 0 ℃- 55 ℃ Gear Material: Half Metal/All Metal Dead Band Width: 5msec Operating Mode: Analog Plug Type: JR, FUTABA General Accessories: Multi-arm, Fixing screws(AS the image shows) Connector Wire: 300mm(Brown: Negative; Red: Positive; Orange: Pulse Input) Steering Gear Control: The control of the steering tools commonly calls for a time base pulse of about 20ms, and the high level part of the pulse is generally the angle management pulse section in the vary of 0~2 1 Servo 0-180 Degree The corresponding control dating is as follows: 0 degrees; 1 degrees; 1 levels 2 degrees; 2 degrees For one hundred eighty degree servo, please use a pro PWM Servo Controller to regulate the angle 2 Servo 360 Degree The guidance equipment is basically corresponding to a geared motor with infinitely variable speed, which might management the speed and course of the rotation There is not any 0-360 diploma attitude management operate Packing: 1 x Servo(Including Accessories) Great for truck, Boat, Racing Car, Helicopter and Airplane

• 
• 
• 
• 
•