विवरण

• Feature:1 Voltage: AC220V2 Load:10A Relay, Resistive load≤8A, Inductive load≤3A3: 1CH4 Frequency : 315MHz/433MHZ Receiver sensitivity: : -105DbWorking temperature : -10&;C - +60&;COutput capacity : Momentary. Toggle Adjusted via Jumper Code type: Learning code Add Controller by means of the Learning Button on the receiver Output State:It is adjusted through means of the Jumper at the Receiver Board,(before you change it want turn OFF the power. Until you've changed it, then turn ON the ability again, or the State aren't changed) A: Momentary-----------Put the Jumper on “pin2 pin3”: Toggle------------put the Jumper on “pin1pin2”C: Latched------------- Take means the Jumper or put the Jumper on any 1 Pin. Momentary------------Press the Transmitter button A, the receiver relay A is ON, launch button A; the receiver relay A is OFF, Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF, Latched------------Press transmitter button A, the receiver relay A is ON, Press transmitter button B, the relay A OFF. Learning Method: Input AC220V for the Receiver the Learning Button till the Led indicator ON. Then press transmitter, the Led indicator flash fast, it imply studying successfully. Clearing Code Keeping press the Learning Button on the receiver until the LED indicator OFF, it imply the code were cleared efficiently Distance: 20-1000m(please notice that is the splendid distance without any block and signal interfere , it might rise and fall about 10%-50% with the block and sign interference ). pacote inclued:A:2x Receiver(with cover)1 x Transmitter(with battery)B:4 x Receiver(with cover)1 x Transmitter(with battery)C:6x Receiver(with cover)1x Transmitter(with battery)D:8x Receiver(with cover)1x Transmitter(with battery) E:12x Receiver(with cover)1x Transmitter(with battery)

• 
• 
• 
• 
• 

समीक्षा