विवरण

• This auctionis for five items size 100mmx200mm 3M 300lse 9472le Double Sided StickersImportant notes: this sticky label is Pure lamination film, smooth to interrupt when touch. Please verify your need before purchase, thanks.DescriptionBrand: 3MModel: 9472LE 300LSEAdhesive Type: 3M High Strength Acrylic Adhesive 300LSEThickness: round 0.13mmColor: ClearTemperature range: from -40°F/-40°C to 300°F/148°CFeatures:Excellent bond to low surface energy substrates including powder coatings and plastics corresponding to polypropylene (PP)vHigh adhesion to metals and excessive floor energy materials, making it appropriate for bonding dissimilar substratesAdhesive presents preferrred protecting energy and anti-lifting propertiesGood resistance to business chemicals, user chemicals, moisture and humidityIdeal answer for general aim attachment and assemblies of a wide variety of materialsMeets a wide selection of automotive and OEM specificationsRecommended ApplicationsBonding tough substrates similar to textured plasticsPlastic to metal bondingConsumer digital device assemblies comparable to phones, capsules and wearable devicesIndustrial digital system assemblies resembling workstationsPlastic meeting bonding in quite a lot of industriesVarious assemblies within the automotive industryApplication and assembly of components on appliancesMedical package and device fabricationGeneral commercial applications similar to trim attachmentApplication TechniquesFor maximum bond strength, the skin must be thoroughly wiped clean and dried. Typical cleaning solvents are methyl ethyl ketone for metals or isopropyl alcohol for plastics. Carefully read and keep on with manufacturer’s precautions and instructions for use when using cleansing solvents.Bond energy can also be advanced with agency software stress and average heat, from 100°F (38°C) to 130°F (54°C), inflicting the adhesive to grow intimate contact with the bonding surface.Ideal tape application temperature vary is 70°F to 100°F (21°C to 38°C). Initial tape software to surfaces at temperatures below 50°F (10°C) isn't always commended for most pressure-sensitive adhesives because the adhesive turns into too firm to stick readily. However, as soon as properly applied, low temperature retaining is mostly satisfactory.

• 

समीक्षा