विवरण

• Specification: Product model : SP901E Control space: with the foremost management (the main leadership is 1024 pixels, then every single channel output of SP901E is 1024 pixels) Control mode: hold close management all controls Built-in pattern : none Output signal: follow the master Outlet mode: one-line IC output 8 channels / two-line output four channels Supported Signals: TTL (SPI, Serial) Compatibale IC type: WS2812B,WS2811,SK6812, SK6812-RGBW,SM16703, WS2813, WS2815, CS8812, AL2815, WS2801, APA102, SK9822, UCS1903, LPD6803, LPD8806, APA102 Scope of use: Symphony LED mushy strip, smooth string, point mild supply Weight: 256g Size: 140mm x 73mm x 27mm Feature: SP901E SPI signal amplifier is easily matched with all kinds of 5V-TTL signal. It receives one sign and simultaneously output 4 or 8 channels of signals. Each channel can management the same quantity of LED pixels as leading controller. It can outputs 8 channels for addressable LED strips with single information wire, corresponding to WS2812B, WS2811, SK6812, SK6812-RGBW,SM16703, and so forth It can outputs four channels for addressable LED strips with records clock wires or dual information wires, equivalent to WS2813, WS2815, CS8812, AL2815, WS2801, APA102, SK9822,etc DC5V~24V wide array of operating voltage, nevertheless it can not adjust the output voltage. That capability the output voltage of energy delivery ought to be comparable to the work voltage of your led lights. Multiple signal amplifiers would be cascaded collectively synchronously. Particularly appropriate for small and medium dream colour lighting fixtures projects. Precautions: (1) The controller can not modify the output voltage at the VCC. That capability the output voltage of your strength supply needs to be reminiscent of the work voltage of your led lights. If your lighting fixtures want 5V input, please use a 5V energy supply, never use 12V or 24V calories supply. (2) The recent in the course of the amplifier is proscribed ,when the intake current is huge, visitor deserve to broaden strength supply additionally. Product Description: Signal Amplifier For Addressable LED Syn Signal : 5V TTl DIFF DAT Signal : 5V TTl Voltage:DC5-24V Rated Current : 10A Working temperature: -10 ~ 60°C Product Festures : 1. Compatible with both TTl and RS485 sign inputs; 2. Two channels of strong-drive TTL signal output to satisfy users' desires for a number of stable signal leadership of lighting: 3. Differential RS485 signal is used for cascading between amplifiers to realize long-distance signal transmission; 4. Can be used on my very own or in cascade with a number of units: 5. Supports large voltage input from DC5 to 24V,with opposite connection protection function. Precautions: 1. The recent gone by the controller is limited the LED light fixtures calls for a recent that exceeds the limit,additional power supply is needed to stop overheating and injury to the amplifier; 2. The calories of the TTL signal output through means of the amplifier is expounded to the type of chip utilized in the connected LED,the length and thickness of the connecting wires,and the variety of LED related in parallel,Please use it inside an inexpensive range in keeping with the actual situation; 3. The transmission distance between amplifiers is tormented by the type of twine used and the surrounding environment,If it is best to transmit alerts over a long distance or in a fancy environment with a lot of interference,please use shielded twisted pair or CAT5 or greater Ethernet cables. Power : Power input port-- VCC is hooked up to the fine terminal of the ability delivery and GND is hooked up to the negative terminal, It supports a massive voltage enter vary of DC5V-24V Syn sign : Cascading sign input and output port-- Compatible with both TTL and RS485 sign inputs "IN+/IN-": Cascading sign input port (When connecting to the major controller,DAT of the main controller is connected to "IN+",and GND is attached to "IN-";When cascading with sub-amplifier,"OUT+"of the previous sub-amplifier is connected to "IN+" and "OUT-" is attached to "IN-") "OUT+/OUT-" : Cascading signal output port ("OUT+" and "OUT-" are respectively connected to "IN+" and "IN-" of a higher sub-amplifier) Expotr to LED : Port for connecting two units of LED VCC DAE GND : Signal output and gear output for the LED Package includes: 1 piece * SP901E orSP902ESignal Amplifier(As your choose)

• 
• 
• 
• 
• 

समीक्षा