विवरण

• BIQU Light Curing Spring Steel Build Plate Kit - For SLA/DLP 3D Printer Size: 202x128mm,196x126mm,140x84mm,138x85mm,138x78mm,135x80mm,135x75mm Features: Stronger adhesion, Flat, hard and durable, easy to remove. Instead of chiseling parts off the aluminum-made build platform of SLA/DLP 3D printers, it is much easier to pop print parts off the build surface by flexing BIQU spring steel build plate slightly. Hint: Before installation, please make sure that the platform is clean and dry before attaching a soft magnetic surface. The soft magnetic surface must be tightly attached. If it is not tightly attached, leaving a gap will cause the resin to soak into the adhesive, leading to loss of viscosity. Please print after 24 hours after installation. For Anycubic Photon /S/X/Mono SE/X/, Mars/Pro/2 Pro/Saturn, LD-002H, etc. Please refer to the figure below for applicable models. If you have any questions about machine type, please contact us.

• 
• 
• 
• 
• 

समीक्षा