विवरण

• Product features: RS5135 is an accumulative electronic counter, which are externally linked with a mechanical switch The NPN normally open sensor is used as the sign input to count and rely the quantity RS5135 is powered by means of DC 12-24V energy supply, and its internal management unit adopts imported microprocessors with strong anti-interference capability It is suitable for various harsh commercial events and might make sure the stable, reliable and continuous operation of the counter 5-digit zero inch (word height 1) vast length LED display, easy to apply Power failure memory function, counting speed a hundred times/second, counting vary 0-99999 The merchandise are appropriate for different industrial occasions, similar to manufacturing line and meeting line statistics, packaging measurement, people circulate statistics, etc Product parameters: Working strength supply and power consumption: Working voltage: DC12V-24V; Power consumption:<2W Display mode: five digit zero inch highlighted nixie tube display Counting range: 0-99999 Counting speed: one hundred times/second Reset function: the exterior contact movable switch is needed as the reset input, which is efficacious at low point Operating environment: - 10 ° C~50 ° C Power failure memory: the depend cost is stored for a long time after power failure External measurement (mm): 79 (length) × 43 (W) × 26 THK Installation formula and size (mm): opening installation: seventy five (long) × 39 (W) Four terminal counter wiring guide: 1: The reset input is hooked up to the unfavorable pole (3) of the flexibility supply during the inching swap Press it to reset the depend cost 2: For signal input, touch or sensor signal input can be utilized It can be utilized with mechanical switch, foot switch, travel switch, proximity switch, Hall switch, photoelectric switch, etc NPN normally open type will be chosen 3: Negative pole of DC strength delivery 4: Positive pole of DC energy supply Matters desiring attention: 1 Contact signal: commonly refers to mechanical switch, such as gentle contact switch, journey switch, foot switch, and so forth Once the swap is grew to become on, it's such as a quick circuit, producing a counting signal The enter sign is energetic low High voltage sign can't be enter 2 The standard counting velocity of the counter is a hundred times/second, and the high-speed 500 times/second can be personalized The high-speed can solely be reached when the duty cycle is 1:1 The obligation cycle refers to the time ratio of the signal excessive level and coffee point three The touch input will probably be dependable If the contact soar causes excessive counting, please parallel 2 capacitance at both ends of the touch to remove it four The sign input line might be as short as probable Avoid wiring together with different strong wires and gear strains If necessary, use shielded wires Package List： 1X Counter

• 
• 
• 
• 
• 

समीक्षा