विवरण

• Note: 1 2 handheld remote control distance about 120 meters 2 The throwing machine can convey a weight of as much as 750g 3 If the buttons can't be managed when receiving the goods, charging and reusing them may result in insufficient power supply, which may not be capable to pressure Remember to apply a 5V/1A, low-power charging head for charging, and cannot use a fast charging high-power charging head It can cause the battery to not charge properly and severely damage the battery Drone Airdrop Thrower System 2 Remote Control General Payload Delivery Thrower Air Dropper Device Camera Drones Accessories Specification: Weight: 750g Size: 55*54*26mm Usage Time: About 12 Hours Built-in Battery: 3 350mAh Charging Interface: Micro USB Charging Time: About ninety Minutes Package included: 1 x Strap 1 x Instruction 1 x Flash Light 1 x Charging Line 1 x Suspension Wire 1 x Remote Controller OR 2 x Strap 2 x Instruction 2 x Flash Light 2 x Charging Line 2 x Suspension Wire 2 x Remote Controller Installation step: 1 Thread the bandage into the adjuster hole (adjustable bandage) 2 Fix it on the bottom of the drone (the straps must avoid the sensors on the bottom of the drone) three Hang the suspension twine onto the latch of the thrower to load goods (Load items in step with the weight of the model) feature: 1 Suitable for DJI Mini 3,Mini three Pro drone, could be delivered remotely, used for throwing bait, throwing gifts, giving wedding ceremony rings, and so forth 2 Mini easy to throw, let you show more possibilities of creation, 3 three The thrower is charged by way of USB, soon released, and the handheld remote control (non-rechargeable) controls the transmission in the course of the button, four The installation weight is ready 40g, mild and safe, and the fuselage design is integrated, that may no longer injury the drone, so you can get interesting airdrop gifts, 5 The backside touchdown tools is effectively increased via 21mm, and it would nonetheless take off and land below choppy ground, effectively preserving the safety of the fuselage Specification: Material: ABS Net weight: seventy eight Maximum load: 100g Charging time: 1 hours Charging interface: Type-C Built-in battery capacity: one hundred fifty mAh Approximate standby time: 12 hours Remote control distance: a hundred meters Product size: 9*6*3 (thrower), 3*5*1 (remote control) Package included: 1 x Thrower 1 x Remote management 1 x set Increase landing equipment 1 x Remote management screwdriver Note: Note: 1 The drone became no longer incorporated 2 The throwing distant isn't always applicable to Mavic Mini 1/Mini 2/Spark Feature: 1 Drone realizes long-distance transmission of things 2 Used for airdrop materials, open air rescue, explicit delivery, wedding flora shipping three The remote control of the thrower is released with one button, and the ultra-small body is robust 4 It could be fixed on the drone with out affecting the flight The straps would be put in to circumvent the lowest sensor 5 Use time: about 2 hours Operating frequency: 2 Remote control distance: about 500 meters Charging time of the thrower: about 30 minutes Remote management charging time: about half-hour Thrower battery specifications: three (built-in lithium battery) Remote management battery specification: 3 (built-in lithium battery) 6 Applicable models: for DJI ini 1 2 3/Mini 3 Pro/Mavic 2/Pro/Air 2/Air/FIMI X8SE, Phantom 3 4, X193 PRO, SG906 PRO, X7 PRO, SG901, SG907, E520S, S162, F11, GW90, GW198, GD91 PRO, M8, ZEN k1, b4 , LYZ L109, JJRC x11 x12 x3 x5 x9, Harbson ZINO, Weili X1S and other unmanned aerial automobiles that will load greater than 100 grams, remote control cars and handheld remote control boats, and so forth Specification: Material: ABS Color: Black Net weight: 55g Product size:9*4*6 (thrower), 15*5*2cm (remote control) Package included: Strap x 1 Manual x 1 Thrower x 1 Hanging twine x 1 Charging cable x 1 Throwing distant x 1

• 
• 
• 
• 
• 

समीक्षा