विवरण

• EPever MPPT 40A 30A 20A 10A Solar Charge Controller 12V 24V Auto Solar Panels Regulator Solar Battery Charger Tracer Series Overview: The Tracer AN sequence Based on typical damaging design and advanced MPPT management algorithm, with LCD showing operating status, this product is artistic, economical and life like Improving the MPPT management set of rules further, Tracer AN collection can cut the utmost strength point loss rate and loss time, quickly track the utmost strength point of the PV array and acquire the utmost energy from photo voltaic modules below any conditions; and may broaden the ratio of energy utilization within the solar method by means of 10%-30% compared with a PWM charging formulation The limitation function of the charging strength and latest and reducingcharging power function computerized improve the soundness which matches even connecting oversize PV modules and in excessive temperature, and develop the professional defense chip for the conversation port, additional recovering the reliability and assembly the different software requirements Notice: This mannequin has upgraded, adapt to MT52 distant monitoring，doesn&;t help MT50 distant tracking Features： Advanced MPPT technology, with performance no lower than 99%\Ultra-fast tracking speed and warranted tracking performance Advanced MPPT control set of rules to play down the utmost energy level loss fee and loss time Wide MPP operating voltage fluctuate High high quality components, perfecting system performance, with maximum conversion performance of 98% Accurate recognition and tracking of multiple-peaks maximum energy level International noted manufacturers of ST and IR&;s components of superb and low failure price are used, which can ensure the product’s service lifestyles Charging strength and latest limitation operate Compatible with lead-acid and lithium-ion batteries Battery temperature reimbursement operate Real-time energy statistics operate Overheating strength reduction function Multiple load work modes The conversation port adopts authentic protection chip, which can present 5VDC energy supply, and has over-current and short-circuit protection With RS-485 conversation bus interface and Modbus communique protocol, it is available to fulfill assorted communique requirements in several conditions Monitor and set the parameters via cellular phone APP or PC software Full-load operation with none drop in capacity in the differ of working environment temperature Extensive digital protection Specifications: Item Tracer 1206AN Tracer 2206AN Tracer 1210AN Tracer 2210AN Tracer 3210AN Tracer 4210AN System nominal voltage 12V/24VDC Auto Rated charge current 10A 20A 10A 20A 30A 40A Rated discharge recent 10A 20A 10A 20A 30A 40A Battery voltage range 8~32V Max PV open circuit voltage 46V 92V MPP voltage range (Battery voltage +2V)~36V (Battery voltage +2V)~72V Max PV input power 130W/12V 260W/24V 260W/12V 520W/24V 130W/12V 260W/24V 260W/12V 520W/24V 390W/12V 780W/24V 520W/12V 1040W/24V Self-consumption <=12mA Discharge circuit voltage drop <=0 Temperature compensate coefficient -3mV/°C/2V (Default) Grounding Common negative RS485 interface 5VDC/100mA LCD backlight time 60S (Default) Environmental Parameters Working surroundings temperature -25°C~+50°C(100% enter and output) Storage temperature range -20°C~+70°C Relative humidity <=95%, N Enclosure IP30 Dimension 172x139 x 44mm 220x154x 52mm 172x139 x 44mm 220x154x 52mm 228x164x55mm 252x180x63mm Mounting measurement 130x130mm 170x145mm 130x130mm 170x145mm 170x164mm 210x171mm Terminal 12AWG(4mm 2 ) 6AWG(16mm 2 ) 12AWG(4mm 2 ) 6AWG(16mm 2 ) 6AWG(16mm 2 ) 6AWG(16mm 2 Recommended cable 12AWG(4mm 2 ) 10AWG(6mm 2 ) 12AWG(4mm 2 ) 10AWG(6mm 2 ) 8AWG(10mm 2 ) 6AWG(16mm 2 ) Weight zero 0 zero 0 1 1 SET SET Set 2210AN-Set 3210AN-Set Accessories (optional): Remote Temperature Sensor (RTS300R47K3) Click Acquisition of battery temperature for conducting temperature reimbursement of controlparameters, the standard length of the cable is 3m (length can be customized) The RTS300R47K3 connects to the port (4th) at the controller NOTE: The temperature sensor short-circuited or damaged, the controller could be charging or discharging at the default temperature 25°C Click USB to RS485 cable CC-USB-RS485-150U Click USB to RS-485 converter is used to monitor every single controller on the community utilizing Solar Station PC application The length of cable is 1 TheCC-USB-RS485-150U connects to the RS-485 Port on the controller Click OTG cable OTG-12CM Used to connect a mobile verbal exchange cable and able to achieve real-time tracking of the controller and amendment of the parameters by using mobile APP software Click Remote Meter MT50 Click MT50 can exhibit various operating data and fault of the method The information would be displayed on a backlit LCD screen, the buttons are easy-to-operate, and the numeric show is readable Click WIFI Serial Adapter eBox-WIFI-01 After the controller is connected with the eBox-WIFI-01 during the standard Ethernet cable (parallel cable), the working status and linked parameters of the controller would be monitored by way of the cellular APP application through WIFI indicators Click RS485 to Bluetooth Adapter eBox-BLE-01 Click After the controller is hooked up with the eBox-BLE-01 during the common Ethernet cable (parallel cable), the working popularity and related parameters of the controller can be monitored by the cellular APP utility via Bluetooth indicators Click

• 
• 
• 
• 
• 

समीक्षा