विवरण

• Features: 1 Ultra thin ultra mini design, small half of hole screw hole, selected supplies 2 Ultra small lithium battery charging increase module with ideally suited performance 3 The output voltage with enhance voltage is adjustable four Constant current, constant voltage charging, with over temperature protection five Charging state dual output, no battery and fault state show Parameters: Operating temperature - 40~80 ℃ Input voltage fluctuate 4~6 Output voltage four adjustable Maximum energy 5W It could be activated at 0V and charged at 2 trickle Up to 1A programmable linear charging current Used for unmarried 3 lithium battery, totally charged with four Constant current/constant voltage charging with over temperature defense Soft birth limit surge current, with battery reverse connection defense Low energy consumption standby, extending battery lifestyles Charge state twin output, no battery and fault state display Description of charging indicator: The module can roughly decide the working state through two LED and other states The CHRG gentle is red, and the STDBY mild is blue When the battery is charged, the red gentle is bright, but the blue mild isn't always vivid When the battery is full, the blue light is bright, and the red gentle is slightly bright If there is a enhance output, consistent with the several output power, it is probable that the pink gentle will continuously be vibrant for charging When no load is connected, the blue mild will be on, and the crimson light may be barely on Instructions: The module supports type-c interface enter and solder joint enter marked with enter on the again Select one among them, and the recommended voltage is ready 5V The module is marked with two outputs The two outputs are the same, and the traces are in parallel You can favor one in every of them by yourself How to connect the battery: If your battery has its own protective plate, you may want merchandise with out discharge protection After connecting B+and B -, you need to short circuit T point to payment and discharge the battery If your battery would not have a protective plate, it is best to want a product with discharge protection This is terribly important, because over discharge of the battery is probably going to trigger the battery to be scrapped Most competitive merchandise don't have discharge protection After the battery is connected to B+and B -, it's not allowed to quick circuit the T point, in any other case the discharge protection will become invalid After wiring, you possibly can modify the output voltage you like with a screwdriver The battery is 3 lithium battery with a full payment voltage of four The battery variety can be 18650 or polymer battery Instructions *The product is charged linearly, the heating is normal, and you'll use it with confidence *Batteries can solely be related in parallel, now not in sequence *The charging current ought to be 0 of the battery capacity, which is 0 times of the means For example, the charging current of the battery of 1000mAH is 400, which is adequate *The charging connection twine shall no longer be too skinny or too lengthy In this way, the relationship resistance is high If it is too small, the battery voltage will drop extra after flushing *It is healthier to have nice touch with the battery Otherwise, the battery voltage will drop more after flushing *The heating is typical when the current is high during the increase operation The larger the present is, the hotter it's This is a normal phenomenon The chip is provided with overheating protection, that are used with self belief Package include: Booster module X1

• 
• 
• 
• 
• 

समीक्षा