विवरण

• Product Discription: The self-regulating heating cable evolved through Minco is extensively used in fireplace protection, petroleum,chemical industry, iron and steel, electrical power and so on to keeppipes,tanks heat and stop frostbite, roof and gutter snow melting There is a uniform core strip of PTC materials between the 2 parallel metallic busbars When the 2 busbars at one end of the cable are related to the ability source, recent flows laterally from one busbar through the PTC materials layer to the alternative busbar The PTC layer is a resistance heating body that's always connected in parallel between the busbars to transform electricity into warmth The core strip resistance will increase with temperature, reaching about sixty five degrees, the resistance is so wide that it nearly blocks the current, and the core strip temperature reaches the high limit and no longer rises but routinely limits the temperature The self-limiting temperature heating belt has uniform temperature, would not overheat, saves electric energy, and has a rapid heating temperature It can be arbitrarily lower and used within the longest use length of the electrical heating belt, and can be overlapped and crossed - 1 The cable is designed for home water pipe and photo voltaic higher water pipe freeze protection requirement in winter, to preserve the water in pipes above 0 centigrade, and do not need a controller - 2 The cable is really easy to install, swimsuit for metal and plastic water pipes - three We use the natural copper because the conductor, and the PE jacket, it&;s durable, UV resist, higher than PVC jacket Product name: water pipe heating cable/self regulating heat trace cable Voltage: 220V 230V 240V Power: 20W/m @10 Celsius Length of strength cord: 1 meter Max operating temperature: 60 Celsius Min set up temperature: -40 Celsius Start-up current: less than zero A/m Min bend radius: @20C:25 @-30C:35 Cable Structure: 1 Pure copper conductor 2 PTC heating detail three PE insulation Package Includes: 1 x DBR heating cable with EU-plug( Length optional) NOTE: this cable is attached and sealed well, it&;s water-proof, you can plug into 220V socket to apply directly!! Product Display: Installation: 1) Wrap the heating cable on water pipes or fastening straight on pipes, both are okay Put the entire cable at the pipes and fasten it every 30~60cm with thermal tape or aluminum tape(sold in my store) 2) Suggest to wrap a layer of rubber insulation on the pipe, enhance efficiency of the heating cable and save energy, can also preserve the heating cables 3) Plug into 220~240V The heat trace formula is completed

• 
• 
• 
• 
• 

समीक्षा