विवरण

• Features ■ Super Small ■ Over-Current Circuit Breaker Lock Protection ■ Separate Set-up for every Operation Delay / Operation Delay Time ■ Wide Range of Set-up ■ Wide Operating Voltage Range ■ Operation Indicator and Identification of Actual Current(LED) ■ Manual / Electric Reset ■ Ambient Insensitive ■ Low Energy Consumption ■(No Volt Release/Fail-safe Operation)→N Type ※Single-phase, three-phase out there (No Volt Release/Fail-safe Operation)→N Used for - Low Voltage Induced Electromotor (600V Level) Protective Relay - Break-Down Watch Current Relay - Alternative Replacement for the Existing Relay Protetcion Protective Item Operating (Trip) Time Over-Current = O-TIME Phase Loss = O-TIME Locked Rotor = D-TIME+O-TIME LED Ammeter Function: After the motor runs smoothly, flip the overcurrent environment knob slowly counter clockwise to the pink indicator light, which is 100% of the particular working current And then turn the knob clockwise to only flip off the crimson gentle at this level for the particular operating latest price of about 103% Run / Operation Indicator: Relay Trip: Red LED Power / common operating status: Green LED Manual / Electric Reset With test button held down,the purple LED is on and the product will trip after O-TIME The relay will be de-energized when RESET button is pushed or the control strength is disconnected Set After the installation is whole the settings as follows Set knob: D-TIME(Delay Time) Set two to three seconds longer than the motor starting time Set knob: O-TIME(Over-current run time) Set less than the motor&;s persistence time with over-current Set knob: Load(Rated Current) Set over 110% of the motor&;s rated current of below 120% of its working recent TEST Instruction With check button ehld down,the red LED is on and the product will day out after O-TIME The relay might be de-energized when RESET button is driven or the management power is disconnected LED Indication Item PWR(Green)LED Trip(Red)LED Power ○ × Normal Running ○ × Trip × ○ Specifications Current Range : Type05) 1-6 Type30) 5-30A Type60) 5-60A Type120) 10-120a Type600) Use an external CT(secondary 5A)over 60A with 05 sort Operating Voltage(Un): Tpye110) 110VAC Tpye220) 90-260VAC Tpye380) 180-460VAC Operating Frequency: 50/60Hz Operating Power: <2W Operating Temperature: -20℃·····+55℃ Waiting(t): D-Time zero O-Time 0 Asymmetry Set: %±10 Contact: 5A 250VAC Resistive Load Connection Diagrams: 35mm Din Rail(D) or Pane(P) Dimensions Connection Diagram

• 
• 
• 
• 

समीक्षा