Tuya Wifi zigbee RF433 US Smart Wall Switch 1/2/3/4 Gang No Neutral Wire Touch Sensor Wall Button Work With Alexa Google Home
BY TNCE
Note, when you favor Zigbee Version switch, you need a tuya zigbee gateway to use Zigbee switch ordinary
Please don't install the glass conceal when the switch is powered on This will cause the panel not to work properly In the case of strength failure, you must conceal the glass disguise after which strength it on in order that it may be used usually
Two-way control, Multi-control Function
Set on APP, Easy set up and wiring Switch1 join common wiring and connect the sunshine bulb Switch2 solely needs usual wiring, No should join the sunshine bulb
Smaller hid parts:
Require less space, making set up extra convenient
433MHz +WiFi or zigbee More Choices
You can control the swap using a 433-enabled product or a wi-fi network
APP handheld remote control
The user can use a smartphone to remotely control the house electronics remotely anytime, anyplace as long because the phone has 2G / 3G / WIFI
network like minded with iOS and Android operating formula with SmartLife and Tuya
Alexa and Google Home Control
Compatible with Amazon Alexa (Echo / Dot / Dot / Tap), Google Assistant, Flight ticket counter with Amazon Alexa or Google Home
to turn your lighting fixtures on or off with your voice, No hub required
Timing
The clever switch is mechanically grew to become on and stale at a given time through the timer operate Choose the time you desire to wake up,
robotically open the light, so that you can smoothly enter the day; desire the time you desire to close the light
Waterproof
appropriate for humid environment, The glass part of the panel is water-resistant
Share With Family
The control switch can be shared with family members
Two wiring modes
Single-phase: The swap is not connected to the neutral wire, and the 2 ends of the sunshine bulb should be linked to the shop (included in the package), in any other case the light bulb will flash
Neutral Line: Switch to attach the neutral wire
Q&A:
1:If the sunshine retains blinking after the panel is wired, what&;s going on?
A:If there isn't any neutral twine and the capacitor isn't connected, the sunshine bulb will blink
2:Can the panel be used with and with out a impartial wire?
A:All could be used, with impartial cord ordinary wiring, no neutral wire have to be linked to the capacitor
3:What if the panel contact switch won&;t open, but you should utilize your mobile phone to regulate it?
A:Open the glass to see if the shell is deformed when locking the shell, deformation, then loose the screws,
loose the screws it will likely be released back, launched back to you and then conceal the glass, and then energy off,
touch can be used
4:This panel has 433MHZ handheld remote control function, learn how to operate to achieve 433 remote control function
A:Press and keep the touch button and press the remote control for about five seconds