5-10 meters steel detector water resistant Pin Probe
Powering on Press and launch button whereas preserving the detector far from any metallic objects You will hear 1 beep and LED Flashlight will stay on Powering Off Press and release the button to strength off LED Light The white LED will remain illuminated whereas the unit is on, providing power-on indication and performing as a flashlight when needed Mode Change The Pin Probe has three alarm modes Audio(Default),Vibration, Audio and Vibration on the identical time Power ON/OFF switch to pick desiring detection mode Lost Pin Probe Alarm After 5 mins of being ON without a button press, Pin Probe will start up emitting step by step quicker caution chirps for 10 seconds Auto-Off Feature After 10 seconds of warning chirps, Pin Probe will strength off mechanically Scraping Blade This rugged edge is good for sifting through grime while in search of the target Pin Probe 360-side-scan detection permits the detector to alarm when the unit is passed in shut proximity to a metallic target Holster Secure to any usual size belt A metal snap within the holster will trigger the Pin Probe to alarm if put away whereas powered on Low Battery Alarm When the battery becomes low, the detector will sound warning alarm And verify distance will quick the 9V battery as quickly as probable Battery Replacement Simply rotate the battery hide counterclockwise to remove and clockwise to tighten through hand To correctly set up the 9V battery, event the larger battery terminal to the bigger opening in the compartment Remove the battery when the unit is to be saved greater than 30 days SPECIFICATIONS: Model Name:HS-08 Operating Frequency: 12 kHz Tuning: Automatic Indicators: Audio,Vibration and Audio and Vibration at the same time Control: Power swap Dimensions: Length: 26 Weight: 160g Battery: Single 9V (not included)