विवरण

• Load weight: 30kg Specification:Material: 304 stainless steel/202 stainless steel elective 304 chrome steel has better corrosion resistance than 202 stainless-steel If you are not yes which sort you must purchase, you might inform me the following sizes of your cabinet,we will put forward appropriate variety or customize for you Cabinet inner height: Cabinet internal depth: Cabinet internal width: Note1 : Customized orders don't support go back and substitute The customization time is ready 7 days。 If you don&;t want to customize, you might decide to upload wood forums on both sides contained in the cupboard Note2:Our pull basket requires correct inner sizes of the cabinet, in any other case it can't be put in Product Size: 36x27×52cm(400 Type) 41x27×52cm(450 Type) 46x27×52cm(500 Type) 56x27×52cm(600 Type) 66x27×52cm(700 Type) 71x27×52cm(750 Type) 76x27×52cm(800 Type) 86x27×52cm(900 Type) Installation requirements: Cabinet internal height: greater than 56cm Cabinet inside depth: greater than 29cm Cabinet internal width: 36-37cm(400 Type) Cabinet internal width: 41-42cm(450 Type) Cabinet inside width: 46-47cm(500 Type) Cabinet inside width: 56-57cm(600 Type) Cabinet inner width: 66-67cm(700 Type) Cabinet internal width: 71-72cm(750 Type) Cabinet internal width: 76-77cm(800 Type) Cabinet inner width: 86-87cm(900 Type) Basket installation steps; Step 1: Fix the facet plate and the decrease plate Step 2: Fix the aspect plate and upper layer plate Step 3: Connect the alternative aspect plate Step 4 : Fix the lower tie rod Step 5: Use the positioning template to ascertain the constant function of the elevator Step 6: Fix one facet of the elevator Step 7:Fix the alternative facet of the elevator Step 8: Fix the linkage rod with the elevators on each side Step 9: Fix the fixed plate of the elevator and the facet plate of the basket Step 10: Test whether or not the lifting is ordinary and the installation is completed Note: 1 corresponding positions of adjusting facets on each side of the elevator are consistent 2 installing the elevators on both sides, check whether or not the elevators return normally 3 The linkage rod doesn't have to be fit to the elevator fixed firmly it is ok four elevator will robotically go back to its original role when it is unloaded the burden is about 2-5kg, it can give up at any time (depending on the load and size, the effect will be different) Tips: Steps 1 to 3 use M4x6 screws to hook up with M4 nuts, 25pcs in complete Step four Use M6X10 screws to repair the decrease tie rod,2pcs in complete Steps five to 7 use 4x14 self tapping screws，10pcs in whole Step 8: Connect with m5x8 screws, 4pcs in complete Step nine Use m5 screws to attach 4 at the left and four at the right,8pcs in complete

• 
• 
• 
• 
• 

समीक्षा