विवरण

• Load weight: 30kg Specification:Material: 304 stainless steel/202 stainless-steel optionally available 304 stainless steel has better corrosion resistance than 202 stainless-steel If you are not sure which kind you need to purchase, you could possibly inform me the following sizes of your cabinet,we will recommend compatible form or customize for you Cabinet inner height: Cabinet internal depth: Cabinet inner width: Note1 : Customized orders don't support return and exchange The customization time is about 7 days。 If you don&;t want to customize, you possibly can decide to upload wooden boards on each side contained in the cupboard Note2:Our pull basket calls for correct inner sizes of the cabinet, otherwise it can't be put in Product Size: 36x27×52cm(400 Type) 41x27×52cm(450 Type) 46x27×52cm(500 Type) 56x27×52cm(600 Type) 66x27×52cm(700 Type) 71x27×52cm(750 Type) 76x27×52cm(800 Type) 86x27×52cm(900 Type) Installation requirements: Cabinet internal height: more than 56cm Cabinet internal depth: more than 29cm Cabinet inside width: 36-37cm(400 Type) Cabinet inside width: 41-42cm(450 Type) Cabinet internal width: 46-47cm(500 Type) Cabinet internal width: 56-57cm(600 Type) Cabinet inside width: 66-67cm(700 Type) Cabinet inner width: 71-72cm(750 Type) Cabinet internal width: 76-77cm(800 Type) Cabinet inside width: 86-87cm(900 Type) Basket installation steps; Step 1: Fix the facet plate and the decrease plate Step 2: Fix the side plate and upper layer plate Step 3: Connect the other side plate Step four : Fix the lower tie rod Step 5: Use the location template to establish the constant position of the elevator Step 6: Fix one aspect of the elevator Step 7:Fix the other aspect of the elevator Step 8: Fix the linkage rod with the elevators on both sides Step 9: Fix the fixed plate of the elevator and the facet plate of the basket Step 10: Test whether or not the lifting is normal and the set up is completed Note: 1 corresponding positions of fixing features on either side of the elevator are consistent 2 installing the elevators on both sides, check whether the elevators return normally 3 The linkage rod would not must be fit to the elevator fixed firmly it is ok four elevator will automatically return to its normal function when it's unloaded the weight is about 2-5kg, it's going to give up at any time (depending on the load and size, the impact could be different) Tips: Steps 1 to three use M4x6 screws to connect with M4 nuts, 25pcs in whole Step 4 Use M6X10 screws to fix the lower tie rod,2pcs in whole Steps 5 to 7 use 4x14 self tapping screws，10pcs in whole Step 8: Connect with m5x8 screws, 4pcs in total Step 9 Use m5 screws to attach four on the left and four at the right,8pcs in whole

• 
• 
• 
• 
• 

समीक्षा