विवरण

• Xiaomi Youpin AKKU Multifunctional Wireless Lithium Hot Melt Glue Gun Repair Tool Home DIY Hot Glue Gun with 10pcs Glue Sticks Before order Please Note: It is Youpin Ecological Chain Products [There is no any Youpin LOGO on it] Thanks for your understanding! 1. Built-in intelligent control chip, the glue gun will automatically turn off the power if it is not used for 3 minutes, and at the same time avoid emptying the battery and damage the lithium battery 2. Customized copper nozzle is loaded with PTC thermistor parts, and the glue can be quickly discharged in 15 seconds 3. Comfortable handle design accords with ergonomic control 4. Anti-dumping retractable bracket design to increase the balance of the product 5. Built-in anti-glue stick reverse rubber ring, metal head adds a large area of heat-resistant silicone protection 6. Built-in high-capacity 2000mah lithium battery, universal battery pack, can be equipped with a variety of Anku products. Specifications: Model: AK602 Power: 10W Voltage DC: 3.6V Heating time: 15 seconds Idle shutdown time: 3 minutes Charger specification DC: 5V≤2A Working temperature: 60±10℃ Glue stick specifications: ∅7mm Battery model: 21700 lithium battery Battery capacity: 3000mAh Charging time: 1-2H Use time: 1-2H Instructions 1. Load the glue stick into the glue gun from the entrance of the glue stick, pull the trigger several times to ensure that the glue stick completely enters the inside of the glue gun. 2. Long press the power switch for 2 seconds, turn on the power, and the warm-up time is 15 seconds. 3. After fully preheating, pull the trigger and the liquid glue will flow out of the glue nozzle. 4. As the glue stick is consumed and used, if the first glue stick enters the glue gun completely, you need to add a new glue stick before you can continue to use it. It is recommended to add Ee2e glue to the head of the glue stick before inserting the new glue stick, and then insert the glue gun to bond with the previous glue stick, which can help the glue stick to be used more smoothly. 5. If you take a short break during use, the glue gun can be supported by the front sliding sleeve and placed on a horizontal workbench; or directly rely on the handle tail platform and stand on the horizontal workbench. It is forbidden to lie down. 6. When the glue gun is in the heating state, a small amount of liquid glue will overflow from the glue nozzle, which is a normal phenomenon. 7. If the glue gun is not operated for 3 minutes, it will automatically turn off the power. 8. Please turn off the power switch after use, and place the glue gun in a safe horizontal position to cool down. It can be stored only after it has cooled down completely in about 30 minutes. The glue gun does not need to be cleaned, and do not pull out the glue stick from the glue gun to prevent the glue from flowing back.

• 
• 
• 
• 
• 

समीक्षा