説明

• 150W DC-AC Converter Booster Module 12V To 110V 200V 220V 280V 150W Inverter Boost Board Transformer Household Battery Inverter Features : Solder-free, the input terminal adopts 7 terminal block The high-frequency AC output adopts blue 301 terminal block, and the DC output is 7 terminal The voltage can be chosen arbitrarily, during the jumper cap, without soldering The output energy is large, if there is a fan to deplete heat, this board can output 200W strength utilizing double-sided circuit board The AC output can be doubled rectified or a purely resistive load Specifications: High-frequency AC output port: only suitable for resistive loads, resembling ordinary family incandescent bulbs (tungsten cord bulbs), ordinary electrical soldering irons, or doubled strain rectifier circuit, measuring the output voltage don't measure this output port, as a result of these voltmeters are designed to measure 50Hz family voltage, no longer high-frequency voltage, there will be large size errors DC output port: you can use a multimeter DC dossier to measure the voltage, could be with switching energy delivery load (the input voltage is marked as AC100-240V electrical home equipment can be used), resistive load 150W inverter battery DC12V step-up AC220V step-up transformer power conversion circuit board Switch: The crimson line and black line on the board are switches to control the presence or absence of excessive voltage output Input voltage: 12V, restricted low enter voltage 8V, limited excessive input voltage 14 Since there's no enter fuse in this board, please add your own fuse, it is strongly recommended to add 15A fuse (lithium battery strength supply and switching energy supply, DC energy supply, such power delivery will cause the tube to overheat and burn out), the output is unstable, the enter must ensure enough strength (current), in any other case it is simple to burn out the tube Output voltage: 110V 200V 220V 280V Output waveform: excessive frequency square wave or DC (unfiltered) Output power: 150W (above 100W, please add fan for cooling) No-load 12V terminal current: 250 mA Operating frequency: 27KHZ Protection: No protection, please upload your individual fuse when using Features: solder-free, enter terminal adopts 7 terminal block, high-frequency AC output adopts blue 301 terminal block, DC output 7 terminal block (directly loosen the screw at the height of the terminal terminal, insert the wire, and tighten the screw) The voltage can be chosen arbitrarily, through the jumper cap, without soldering The output energy is large, if there's a fan to expend heat, this board can output 200W energy utilizing double-sided circuit board AC output: could be doubled rectified, or natural resistive load Output voltage: Already marked on the circuit board Attention: Available electrical range: switching energy supply load, generally marked with input voltage 100-240V electric home equipment can commonly be used, reminiscent of non-cottage mobile phone chargers, set-top boxes, DVD, LED lighting fixtures (there is continuing latest drive, so some would be used, some LED lamps cannot be used, when used, can only be related to the DC output port, must never be related to the high-frequency AC output port) normal tungsten light bulbs, small hand drills, energy-saving lamps, normal non-temperature regulating electric soldering iron, the circuit that calls for high-voltage voltage rectification, LCD TV set linked to DC output port and so on Unusable electric range: iron core transformers, such as audio using iron core transformers, temperature management electric soldering irons, dimming lamps, AC motor lots resembling electrical fans Cheap capacitance step-down LED lamps (e LED evening lights, straw hat LED lamps, LED lamps with plastic housings) Package Included: Inverter X1

• 
• 
• 
• 
• 

レビュー