説明

• Specification:Module Properties: non-isolated step-up module (BOOST)65 * 47 * 23 (length * width * high)Input voltage: DC 10-32VOutput voltage: DC 12-35V (adjustable)Output Current: 10A (MAX)Input Current: 16A (MAX) (Please enhance heat dissipation if greater than 10A)Output power: natural cooling 100W (MAX), enhance warmth dissipation 150W (MAX)Easy to drive 65W 90W dual-core pocket book a 12V battery force 19V three notebook, the module temperature about 45°CConversion efficiency: 94% (measured at Input 16V, output 19V 2)Output Ripple: 2% (MAX) 20M-bandwidthOperating Temperature: Industrial (-40°C to +85°C) (ambient temperature exceeds 40°C, decrease energy use, or to augment warmth dissipation)Full load temperature rise: 45°CNo-load current: 25mA typicalVoltage regulation: ± 0%Dynamic reaction speed: 5% 200uSShort circuit protection: None (Please Install fuses and defense circuits at Input port)Input Reverse Polarity Protection: None (Please Series diode at the input port) Some Applications:DIY an output adjustable car strength supply, join the 12V input, and output could be 14-35V(adjustable freely), However, the output voltage cannot be less than the input voltage Car laptop computer power supply: related to 12V strength supply, output voltage legislation as your pocket book need charger You can use the 12V strength delivery to fee battery more than 12V, for example, 24V battery Product Description: This high-voltage module is made through the use of the main of Tesla coil, and outputs high-voltage pulse high-voltage recent It is small in size, excessive in efficiency, and easy in peripheral circuits (just join the swap and the battery can be used) The discharge depth is violent Input voltage: DC 3V-6V Input current: 2A-5A High voltage type: pulse recent sort Output voltage: about 200,000 volts (please listen in on security when using) High voltage two-pole discharge distance: 10mm-20mm Output excessive voltage line length: about 100mm Input power cable length: about 100mm (red cord is positive) Dimensions: Φ24*64mm About the flexibility supply: you can use a single 3 lithium battery or two in series, akin to 18650 battery, an idle cellular phone battery (to remove the safety board, the commended capability is above 2000mAh) or NiCd/NiMH battery pack, 4V or 6V lead-acid battery etc This module is a finished module of a high-voltage inverter transformer/booster for clinical manufacturing After inputting DC3V-7 voltage on the input end, a DC high voltage of about 200,000 volts (about 1-2 cm arc) would be received on the output end , be aware that there's no ignition function Wiring: The purple twine is the advantageous pole of the ability delivery The output is two extreme temperature and high stress resistant silicone wires Features: Suitable for electrical furnace, water heater, lamps, small motor, electrical iron and so forth Connect this system with lamp or domestic equipment in a series connection, you would play a brightness adjustment, speed, pressure, temperature management impact Life span and straightforward installation, very handy to use Specification: Material: Plastic, Metal Input Voltage: 220V Maximum Power: 2000W Adjustable Voltage: 50-220V AC Size: approx 5*4*2 Net Weight: 43g Features: With a wide input voltage range of 6V to 40V, the stepper reducer adapter can precisely adjust the output voltage and recent Efficiency can reach 96%, measured at 20A, changing 24V to 12V It is designed with a high recent 75V/80A dual MOS motherboard High frequency electrolytic capacitors with low resistance, low ripple, and stable output are used for enter and output The use of this screw head for 30A excessive current wiring is handy The pressure lowering module has two warmth sinks that can expand warmth dissipation When there is a significant distinction between the enter and output voltages, please minimize the flexibility and latest Specifications: Input voltage: 6V to 40V DC (recommended 10V to 40V) Output voltage: 1 to 36V DC Output current: 20A (maximum), 15A (recommended) Efficiency: 95% (24V to 12V, 20A) Output interval: ≤ 50mV Wiring method: Terminal Short circuit resistance: self recovery (cannot brief circuit for an extended time) Size: 60x53x27mm/2“ VO+: Positive output VO -: Audio output +Printing: forward enter -Printing: Audio Input CV: Adjustable output voltage CC: Adjustable output latest Micro: switch on and rancid low-voltage output; Suspension system, effective high-pressure point When the enter and output are grounded together, fixed voltage no-load CV output and constant latest CC output The package includes: 1x300W 20A Constant Current Adjustable Lower Switch Circuit Board Voltage Module

• 
• 
• 
• 
• 

レビュー