three LiFePO4 Battery Charge and Discharger(boost) modules
Charging Function:
Charge voltage : DC 4V-6V(Recommend DC 5V)
Charging current : 0-1A
Full charge voltage : 3+-1%
Led indicator : &;&;OK&;&; LED is totally charged OR battery failure status indicator;
&;&;CR&;&; LED is charge status indicator
Discharge Function (boost):
(Boost in)Discharge current : 0-1A;
(Boost in)Discharge quiescent latest : 450uA
(Boost in)Discharge conversion efficiency : 78%-90%
(Boost out)Output current : 0-1A(5V),0-0(9V),0-0(12V);
Operating ambient temperature : -40° to +85°
Storage temperature : -65° to +125°
Small Size : 35*11*3
Light weight : 1
Charging Features:
Complete Charge Management for Single Cell LiFePO4 Battery
Precharge Conditioning for Reviving Deeply Discharged Cells and Minimizing Heat Dissipation During Initial Stage of Charge
Constant-Current/Constant-Voltage/ConstantTemperature Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating
Automatic Low-Power Sleep Mode When Input Supply Voltage is Removed
C/10 Charge Termination
Automatic Recharge
Battery Temperature Sensing
Discharge Protection(boost):
Over current protection(OCP)
Over voltage protection(OVP)
Short circuit protection(SCP)
Over temperature protection(OTP)
How to use:
1 Connect three LiFePO4 battery
2 Connect DC 5V energy delivery to totally price the battery
three Connect load to discharge
Note :
1 There is no voltage output with out battery
2 Please solely payment the battery earlier than connecting the output load
3 When the charge/discharge current exceeds 50%, the module will heat up Please expand the heat dissipation
Applications:
three Battery powered equipment
1S LiFePO4 Battery 18650 32700
UPS strength delivery kit diy
Solar charging
MP3/MP4 participant
Audio equipment
Video kit
Portable Devices
Bluetooth/Wifi Applications
Open Source Hardware(ESP32 ESP8266)
Three wiring diagrams:
Wiring Diagram 1
2 IN 1 Charger & Boost(UPS Function)
Wiring Diagram 2
Only Charger
Wiring Diagram 3
Only Discharge(Boost)