説明

• 4Pcs 180mm 100w passive led warmth sinks pre-drilled for COB CREE CXB3590 Bridgelux Vero29 gen7 Citizen clu058 1825Product detailsSize180mmMaterialAL1070(99%)Usagecxb3590,vero 29 058 and so onWatts95-105 wattsProduct Keywordsanodized heatsink tradition aluminumFeatureStandard pin fin warmth sinks are comparatively new derivatives of the Aluminum warmth sink. Unlike aluminum extrusion warmth sinks, which contain an array of vertically oriented pins, Standard pin fins facets pins that delicately bend outward. Curving the pins on this capacity will increase the spacing between the pins and allows surrounding air streams to go into and go out the pin array extra efficiently with out sacrificing floor area. The influence of increased pin spacing on warmth sink performance is magnified at decrease air speeds as a results of vulnerable air streams have less strength to penetrate the array of pins. In low air speed environments and in pure convection, theincreased spacing between the pins reduces the heat sink&;s thermal resistance by means of as much as forty percent as against a aluminum extrusion profile heat sink. As a result, pin fins are recommended for low and practical airspeed environmentsand for pure convection cooling. Φ120mm*H70mm(for 40-50W): Φ133mm*H70mm(for 50-65W): Φ150mm*H70mm(for 60-70W): Φ163mm*H70mm(for 75-85W): Φ180mm*H70mm(for 95-105W): Side flat bloodless forging heatsink for led light/pin fin heatsinkHeat sinks are used to enhance warmth dissipation from sizzling surfaces. A warmth sink does this by increasing the outside discipline that's in contact with the cooling fluid or air. From board level warm temperature sinks, to LED warmth sinks, to excessive calories warm temperature sinks,our aims are to provide you the finest heatsink that is the most charge wonderful and splendid quality. Our team will see that we do whatever we can to make this happen. Compatible with Bridgelux Vero 29 COB 1 drilled for Bridgelux Vero 29 (not included) 2 drilled for reflector adapter LEDiL C13584_CLAMP-VERO29 and LEDiL F13838_ANGELINA-XW (not included) three drilled 100mm Glass lens with 112mm diagonal mounting positions. (not included) four M3 screw positions on outer perimeter and 2x M3 screw positions on features for mounting heatsink Compatible with Cree CXB 3590 COB 1 drilled for Cree CXB 3590 with Ideal Holder 50-2303CR (not included) 2 drilled for reflector adapter 50-2300AN and LEDiL F13838_ANGELINA-XW (not included) 3 drilled 100mm Glass lens with 112mm diagonal mounting positions. (not included) four M3 screw positions on outer perimeter and 2x M3 screw positions on aspects for mounting heatsink

• 
• 
• 
• 
• 

レビュー