説明

• Parameter:Material: Aluminum Alloy LED: Luminus SFT40 Low voltage warning: Yes Reverse polarity protection: Yes Lens type: Ar-coated glass lens Reflector: Smooth reflector Mode memory: Yes Tailstand: Yes Required battery type: 21700 lithium battery Required battery quantity: 1pcs Driver: four modes 0%-3%-30%-100% / 12 groups, max current output 6000mA, Temperature defense leadership within Length / Diameter : 124 / 27 Weight: ninety one type:A. With 21700 battery: 1*S21B Flashlight 1*21700 rechargeable battery 1*USB charger 1*Rope B. No battery: 1*S21B Flashlight 1*Rope1. Driver instructions:(4 modes)Modes : 0%-3%-30%-100% max current output is 6000mA Its best virtue is that no frequency could be seen in any mode, and there is temperature management. It can management the flashlight temperature to not exceed 55 degrees Celsius, If the flashlight temperature is under fifty five stages Celsius, it will output full current. If it is above 55 levels Celsius, it's going to always adjust the present in order that the flashlight will not overheat. Driver instructions: (12 groups)1 the replace to show the flashlight on/off,tap the change to choose mode 2 flashlight is became on,tap the switch 20 times quickly to enter into config mode.(On a visual interface,as lengthy as you click an option, it means that the choice is selected. The flashlight has no seen interface. It flashes to represent an option, and "tap the substitute within the flashing process" potential to choose the option.) Option 1 (normal-flash 1 time + buzz-flash): faucet the swap to go into into sub-option to determine the mode group,If the consumer has no operation, the config mode will enter choice 2. -------------sub-option 1 (normal-flash 1 time) : faucet the substitute to decide mode organization 1 (0%, 1%, 10%, 35%, 100%, strobe, biking, battery-check) -------------sub-option 1 (normal-flash 2 times) : faucet the replace to select mode organization 2 (0%, 1%, 10%, 35%, 100%) -------------sub-option 1 (normal-flash three times) : faucet the switch to pick mode group 3 (100%, 35%, 10%, 1%, 0%) -------------sub-option 1 (normal-flash four times) : faucet the swap to come to a decision mode organization 4 (1%, 20%, 100%, strobe, biking, battery-check, SOS) -------------sub-option 1 (normal-flash 5 times) : tap the change to make a decision mode group 5 (1%, 20%, 100%) -------------sub-option 1 (normal-flash 6 times) : faucet the switch to choose mode group 6 (100%, 20%, 1%) -------------sub-option 1 (normal-flash 7 times) : faucet the substitute to make your mind up mode group 7 (0%, 1%, 10%, 50%, strobe, biking, battery-check, SOS) -------------sub-option 1 (normal-flash 8 times) : tap the switch to pick mode organization 8(0%, 1%, 10%, 50%) -------------sub-option 1 (normal-flash nine times) : tap the change to choose mode group nine (50%, 10%, 1%, 0%) -------------sub-option 1 (normal-flash 10 times) : tap the change to select mode organization 10 (1%, 10%, 35%, 100%) -------------sub-option 1 (normal-flash 11 times) : tap the substitute to choose mode organization eleven (100%, 20%, strobe) -------------sub-option 1 (normal-flash 12 times) : tap the change to choose mode organization 12(100% only) Option 2 (normal-flash 2 events + buzz-flash): tap the switch to lively the mode memory or inactive it,If the person has no operation,flashlight will enter into the ultimate mode. Battery-check instructions: <2 1 flash, 2 2 flashes, 3 three flashes, three 4 flashes, >3 five flashes

• 
• 
• 
• 
• 

レビュー