説明

• Product Name: DC 5V 12V 24V Multifunction Pulse Counter Trigger Delay Timer Relay Simple PLC Module for Smart Home Package inlcuded: 1 PCS KC23C01 DC 5V/12V/24V 1 channel Counter Cycle Delay ON/OFF Relay Board Product Specifications:Working voltage: DC 12V (DC 5V/ DC24V optional) Working current: Digital tube OFF (Power-Saving Status): Relay OFF 6MA, Relay ON 35MA Digital tube ON (Working Status): Relay OFF 29MA, Relay ON 56MA Three states : Working State, Power-Saving Status, Setting State Input port : Optocoupler isolation input, like minded with NPN/PNP enter (5-24V change signal) Output port : 10A relay NO COM NC three ports Working mode: F00-F05 single-shot pulse management mode, which is a general postpone relaymode F10-F15 pulse counting control mode, depend management relay for enter port Size: 74*40*19 Weight : 29 Relay load: 10A/250VAC; 10A/30VDC Please touch me for detailed directions !!! Product Features: Delay time 0(115), Step 0, Accuracy zero Pulse rely value 0-9999 can be set F00-F05, F10-F15 12 working modes, there are eight working modes to set the number of cycles There are three wiring tricks for the trigger sign enter terminal: 1 No exterior sign supply required 2 Trigger with NPN supply three Trigger with PNP signal supply Setup Instructions: Short press: Press key time is less than 2 seconds; Long press: Press key time more than 2 seconds; Status : Working State, Power-Saving Status, Setting State Working State: In operating state when powered on, F00-F05 mode exhibits last time, F10-F15 mode displays final time and pulse count price Note: When the rest time is higher than four digits, brief press the &;&;OK&;&; button to scroll to reveal the remainder time once Setting Status: Short press the &;&;SET&;&; button to go into the Setting Status, then quick press &;&;SET&;&; to switch parameters, brief press &;&;++&;&;/&;&;--&;&; to switch parameters Short press the &;&;OK&;&; button to save lots of the parameters and exit the environment state Note: After environment the parameters, it ought to be powered on again Query Status: without editing the parameter Setting Status, short press the &;&;SET&;&; button to go into the Query Status, then press &;&;SET&;&; to change parameters, and brief press the &;&;OK&;&; button to exit the Query Status Power-Saving Status: The Working State of the digital tube is grew to become off In this state, the electronic tube does not exhibit and other functions paintings normally Press and maintain the &;&;OK&;&; button for five seconds to enter the Power-Saving Status, and press and preserve the &;&;OK&;&; button again for five seconds to exit the Power-Saving Status Notice: 1 In the Power-Saving Status, you possibly can still enter the surroundings and question state, and it's going to mechanically enter the Power-Saving Status state after 20 seconds of no key operation 2 After the flexibility is turned on again, the Digital Tube exhibits for 20 seconds, the best way to turn off the Digital Tube Factory Setting: Press and hold the &;&;++&;&; and &;&;--&;&; buttons simultaneously for 3 seconds to restore the Factory Settings and turn off the show of the electronic tube Run the default parameters after energy cycle Note: After surroundings the parameters, it needs to be powered on again Exception handling: 1 If you come upon inexplicable problems, please strength on again (this is because there's no restart after atmosphere parameters) 2 If the issue still cannot be solved after powering on again, please press and hold the &;&;++&;&; and &;&;--&;&; buttons simultaneously for three seconds to revive the manufacturing unit settings then power on again Please contact me for detailed directions !!!

• 
• 

レビュー