説明

• Note: 1 2 handheld remote control distance about one hundred twenty meters 2 The throwing machine can convey a weight of up to 750g 3 If the buttons cannot be managed when receiving the goods, charging and reusing them may end up in inadequate energy supply, which may no longer be capable of drive Remember to apply a 5V/1A, low-power charging head for charging, and can't use a fast charging high-power charging head It may cause the battery not to charge wisely and seriously injury the battery Drone Airdrop Thrower System 2 Remote Control General Payload Delivery Thrower Air Dropper Device Camera Drones Accessories Specification: Weight: 750g Size: 55*54*26mm Usage Time: About 12 Hours Built-in Battery: 3 350mAh Charging Interface: Micro USB Charging Time: About 90 Minutes Package included: 1 x Strap 1 x Instruction 1 x Flash Light 1 x Charging Line 1 x Suspension Wire 1 x Remote Controller OR 2 x Strap 2 x Instruction 2 x Flash Light 2 x Charging Line 2 x Suspension Wire 2 x Remote Controller Installation step: 1 Thread the bandage into the adjuster hole (adjustable bandage) 2 Fix it at the bottom of the drone (the straps must avoid the sensors on the backside of the drone) 3 Hang the suspension twine onto the latch of the thrower to load goods (Load items according to the weight of the model) feature: 1 Suitable for DJI Mini 3,Mini three Pro drone, could be delivered remotely, used for throwing bait, throwing gifts, giving marriage ceremony rings, and so forth 2 Mini easy to throw, allow you to display more possibilities of creation, three three The thrower is charged via USB, soon released, and the remote control (non-rechargeable) controls the transmission during the button, 4 The installation weight is ready 40g, light and safe, and the fuselage design is integrated, which will no longer harm the drone, so you can get appealing airdrop gifts, 5 The bottom touchdown gear is efficiently elevated through 21mm, and it'll nonetheless take off and land below uneven ground, effectively retaining the security of the fuselage Specification: Material: ABS Net weight: 78 Maximum load: 100g Charging time: 1 hours Charging interface: Type-C Built-in battery capacity: 150 mAh Approximate standby time: 12 hours Remote control distance: a hundred meters Product size: 9*6*3 (thrower), 3*5*1 (remote control) Package included: 1 x Thrower 1 x Remote management 1 x set Increase landing equipment 1 x Remote management screwdriver Note: Note: 1 The drone was no longer incorporated 2 The throwing remote is not relevant to Mavic Mini 1/Mini 2/Spark Feature: 1 Drone realizes long-distance transmission of things 2 Used for airdrop materials, outdoors rescue, specific delivery, marriage ceremony vegetation shipping 3 The remote control of the thrower is launched with one button, and the ultra-small physique is robust four It could be constant on the drone without affecting the flight The straps could be put in to bypass the bottom sensor five Use time: about 2 hours Operating frequency: 2 Remote control distance: about 500 meters Charging time of the thrower: about 30 minutes Remote control charging time: about 30 minutes Thrower battery specifications: 3 (built-in lithium battery) Remote control battery specification: 3 (built-in lithium battery) 6 Applicable models: for DJI ini 1 2 3/Mini three Pro/Mavic 2/Pro/Air 2/Air/FIMI X8SE, Phantom 3 4, X193 PRO, SG906 PRO, X7 PRO, SG901, SG907, E520S, S162, F11, GW90, GW198, GD91 PRO, M8, ZEN k1, b4 , LYZ L109, JJRC x11 x12 x3 x5 x9, Harbson ZINO, Weili X1S and other unmanned aerial cars that may load more than a hundred grams, handheld remote control vehicles and handheld remote control boats, and so forth Specification: Material: ABS Color: Black Net weight: 55g Product size:9*4*6 (thrower), 15*5*2cm (remote control) Package included: Strap x 1 Manual x 1 Thrower x 1 Hanging cord x 1 Charging cable x 1 Throwing remote x 1

• 
• 
• 
• 
• 

レビュー