説明

• Description: 1. Any cubic 3D Printer Accessories for Vyper E for Kobraa Max 2. Do not turn out the wire at the sealant, otherwise, it will easily lead to the failure of the sensing function. 3. When installing the mounting block, the screws should not be tightened too tightly, just tighten properly without shaking, otherwise, it will cause additional stress on the mounting block to affect the induction plate, thereby affecting the performance of the leveling switch. 4. After the installation is complete, first lift the Z-axis, use tweezers or other tools to touch the nozzle lightly continuously, and observe whether the indicator light of the integrated motherboard connected to the sensor chip will light up as the nozzle is touched, and the sensor It is normal if the indicator light is normally off when the installation block is not triggered. 5. Fixed hot end, automatic leveling. (need to cooperate with the original model motherboard) Specification: Weight: about 7g Size: about 12*8*1cm/4.72*3.15*0.39in (transparent bag) Applicable models: Vyper E/Kobraa series models Packing List: 1* Vyper EKobra Hot End Mounting Block 4* Screw

• 
• 
• 
• 
• 

レビュー