説明

• modname=products&cols=4&colspace=10&rowspace=10&showName=true&showPrice=trueKSD303 10A 250V 45C 95C 150C Degrees Celsius Manual Reset Normally Closed Temperature Control SwitchesCNY8 KSD301 45C 97C 150C Degree Celsuis 10A 250V Manual Reset Thermostat Normally Closed Temperature SwitchesCNY8 250V 10A Normally Closed / Open Thermal Sensor Temperature Switches zero 10 40 65 70 80 130 a hundred and fifty Celsuis DegreeCNY8 250V 5A 95 Celsuis Degree Normally Closed Thermal cutoff protector Temperature Switches for Water dispenserCNY12 KSD301 50C-150C Degree 10A 250V Manual Reset Thermostat Normally Closed Temperature Switch 75C 85C 95C 105C 100C Degree Key Parameters: Model: KSD301 handbook reset, normal closed; Type: flat pins & constant ring Voltage: 0-250VAC Current: 0-10A Material: Alloy+bakelite Usage frequency: 50000 occasions Note: The out there temperature differ is 50-150 levels Celsius If you require different temperatures, please contact us Here’s the data on find out how to select the appropriate thermal switch: 1 **Provide high-resolution images of the front and again of the thermal switch**: This can assist us verify the shape, material, whether or not it's handbook or automatic, the current rating, and the temperature differ of the swap 2 **Identify the type of electric package the thermal switch is used for**: This may help us determine if the switch is generally open (NO) or usually closed (NC) three **In maximum cases, thermal switches used in electrical equipment are usually normally closed (NC)** 4 **If you have a multimeter**, you need to use it to check whether or not the thermal switch is generally open or normally closed 5 **Definitions** of normally closed (NC) and usually open (NO) thermal switches: - **Normally Closed (NC)**: Under common conditions, when the temperature rises to the brink indicated on the switch, the circuit changes from closed (connected) to open (disconnected), and the device stops working - **Normally Open (NO)**: Under normal conditions, when the temperature rises to the threshold indicated at the switch, the circuit modifications from open (disconnected) to closed (connected), and the device starts working This steering should assist you in deciding on the right thermal swap on your application modname=images&cols=1&colspace=10&rowspace=10&align=center

• 
• 
• 
• 
• 

レビュー