説明

• 1 OVERVIEW HAT310 ATS Controller is appropriate for 2-stage of PC, and ATS of CC category (close sign is continuing output) It can accurately discover 3-phase 4-wire mains voltage and generator single section voltage When mains beneath voltage and lack of part occur, HAT310 will control ATS transfer after delay The controller can provoke signals to begin genset if mains unavailable 2 PERFORMANCE AND CHARACTERISTICS HAT310 controller can come across 3-phase 4-wire mains voltage/generator single part voltage and control ATS Main characteristics are as follows, 1) With auomatic move and restore function 2) With below volatge and lack of section detection operate 3) LED indicators at the pannel can show operating popularity of controller obviously 4) Applicable for 2 remoted neutral line 5) Mains normal postpone configured via potentiometer (range: 1~60s), and generator ordinary put off through potentiometer (range: 1~60s) 6) Mains is unavailable, if any phase voltage belows minimal operating voltage or phase loss happened genset can be started 7) Output touch ability of mains and generator move relay is 16A AC250V, which might directly used to power change conversion 8) Output touch ability of GENS START relay is 16A AC250V, it is volt unfastened normally-open/normally-closed contect 9) Strong anti-electromagnetic interference functionality allow controller to apply within the enviroment with solid electromagnetic interfrence 10) Modular design, self extinguishing ABS plastic shell, pluggable terminal, compact structure 11) Two installation ways: inside 35mm guide rail and inside screw mounting

• 
• 
• 
• 
• 

レビュー