説明

• Description 1 (Receiver): Working voltage: AC85-265V 60HZ/50HZWorking frequency: 433MHZPower consumption in standby mode: <0 power: <1100WReceiving sensitivity: -108dBMWorking way:wireless controlCoding way: learning codeModulation: ASKWorking temperature: -10*C~+70"CSize: 47*42*22 (mm) 2 Wall Switch: Working voltage: DC3 frequency:433MHZPower intake in standby mode:<1uATransmitter power: <10mWWorking way: wireless controlCoding way: EV1527 learning codeModulation: ASKWorking temperature:-10"C~+70*CSize: 86*86* 15mmBattery:work with 12V 27A battery(battery included) Features： 1 switches can control different receivers energy,avoid darkness with all types of Lights and Ceiling Fan,CFL,Fluorescent lamp can load 300W,other can load 2500w is a 86 wall panel that may be stuck onto anywhere. It is a learning code transmitter EV1527 IC Chip. It would be realized into maximum of the learning code receiver. Setting way: How to get the signal：Step 1: Press the training button(on the Receiver) twice. Wait for three seconds; Step 2: Press one button at the remote control. Wait for 3 seconds. Succeed to wash the signal：Only one step :Press the training button(on the Receiver) 8 times. Wait for 3 seconds; Note:Wall substitute itself cannot control lighting on off should paintings with rf receiver collectively list:There are different combinations within the options, which are helpful to use, please purchase in step with exact wishes manualHow to get the signal：Step 1: Press the learning button(on the Receiver) twice. Wait for three seconds; Step 2: Press one button on the distant control. Wait for 3 seconds. Succeed to clean the signal：Only one step :Press the educational button(on the Receiver) 8 times. Wait for 3 seconds;

• 
• 
• 
• 
• 

レビュー