Features
■ Compact Design
■ Overload / Phase Loss / Locked Rotor
Protection
■ Independently Adjustable Starting Trip Delay &
Operating Time
■ Wide Current Range:0~600A
■ Wide Operating Voltage Range
■ PWR & Trip Indication LED
■ Manual / Electric Reset
■ Ambient Insensitive
■ Low Energy Consumption
■(No Volt Release/Fail-safe Operation)→N Type
※Single-phase, three-phase available (No Volt Release/Fail-safe Operation)→N
Used for
- Low Voltage Induced Electromotor (600V Level)
Protective Relay
- Break-Down Watch Current Relay
- Alternative Replacement for the Existing Relay
Protetcion
Protective Item Operating (Trip) Time
Over-Current = O-TIME
Phase Loss = O-TIME
Locked Rotor = D-TIME+O-TIME
LED
Ammeter Function:
After the motor runs smoothly, turn the overcurrent atmosphere knob slowly counter clockwise to the purple indicator light, which is 100 percent of the particular running latest And then turn the knob clockwise to simply turn off the crimson light at this point for the actual working current price of about 103%
Run / Operation Indicator:
Relay Trip: Red LED
Power / traditional working status: Green LED
Manual / Electric Reset
With examine button ehld down,the red LED is on and the product will trip after O-TIME
The relay can be de-energized when RESET button is driven or the control energy is disconnected
Set
After the set up is whole the settings as follows
Set knob: D-TIME(Delay Time) Set two to 3 seconds longer than the motor starting time
Set knob: O-TIME(Over-current run time) Set lower than the motor&;s patience time with over-current
Set knob: Load(Rated Current) Set over 110% of the motor&;s rated recent of below 120% of its working recent
TEST Instruction
With check button held down,the pink LED is on and the product will trip after O-TIME
The relay could be de-energized when RESET button is pushed or the control energy is disconnected
LED Indication
Item PWR(Green)LED Trip(Red)LED
Power ○ ×
Normal Running ○ ×
Trip × ○
Specifications
Current Range : Type05) zero
Type30) 3-35A
Type60) 5-70A
Type600) Use an external
CT(secondary 5A)over 60A with 05 type
Operating Voltage(Un): Tpye110)110VAC
Tpye220)90-260VAC
Tpye380)180-460VAC
Operating Frequency: 50/60Hz
Operating Power: <2W
Operating Temperature: -20℃·····+55℃
Waiting(t): D-Time zero
O-Time 0
Asymmetry Set: %±10
Contact: 5A 250VAC Resistive Load
Connection Diagrams: 35mm Din Rail(D) or
Pane(P)
Dimensions
Construction
Connection Diagram