説明

• Instruction Insert 2 AA batteries (batteries no longer included); Unlock the safety/protective hide to the down position; Press the sealing machine to preheat for 5-7 seconds; The floor of the bag required for knocking down is sealed alongside the edge; Place the plastic sealer on the bag and press down firmly; When pressed, movement moderately from one end to the other; Finally loosen the protecting cover, and then movement it again to the up position. Specification Material:ABSSize:10*3*3 Color:White/Pink Battery:1,2 AA Batteries User Manual 1 mechanical device won&;t generate warmth on its own after being installed fresh batteries. Press it for 3-5 seconds in order that warmth will arise gradually. 2 use brand new batteries. Don&;t mix up the polarity of the batteries. Make sure the batteries are wisely installed. Otherwise, the mechanical device is not ready to generate heat. 3 press the mechanical device for 3 to 5 seconds after the batteries are correctly installed. Then the machine will initiating generating heat. 4 a thick plastic bag, please flow it slowly between the mechanical device to let the warmth spread lightly for a more in-depth sealing performance. 5 need to remove the batteries. After use, easily move the hook between the mechanical device to dam contacts of the 2 metal parts. Tips: Please don&;t press the machine too hard. Otherwise, the heating metals may possibly develop into deformed and broken. The plastic bag for sealing must be clear with out oil or water.

• 
• 
• 
• 
• 

レビュー