Preces apraksts

• 1/5/10/20pcs Thermal Grease Paste Conductive Heatsink Plaster Viscous Adhesive Glue For Chip VGA RAM LED IC Cooler Radiator CoolDescription:1.It has excessive strength and rapid bonding effect, and is suitable for directly attaching diversified components, LEDs and warmth sinks. 2.Good thermal conductivity, solid adhesion, vacuum packaging isn't easy to oxidize and dry, good viscosity, short drying time. 3.It has good conductivity, wide working temperature vary (-60~200°C), and temporary resistance to 300°C. 4.It has quick surface curing time, long storage period, non-toxic, solvent-free, and can be safely applied to elastic bonding, warmth dissipation, insulation and packaging of electronics, instruments, LEDs, warmth sinks, etc. 5.Instructions: 1) Extrusion of the product immediately during use, rubbing the skin of the adherend, and immediately covering it after use, in case of trial again 2) The surface constant pace is expounded to the relative humidity and temperature within the air; the higher the temperature, the speedier the curing speed, and vice versa. 3) Recommended thickness: 0.1-0.5mm, the thinner the better. 4) Please use solvent to clean the surface of the bonded object before use (such as alcohol), keep away from cleaning with detergent, and practice it after the surface is clean. 6.The equipment is sealing and the product is covered with a vacuum bag to insulate the air and increase the garage time.Specifications:Thermal properties, strong glue adhesion. Specifications: 5g (single) Melting amount: 0 (200°C/24 Hours) Evaporation: 0.001% (200°C/24 Hours) Thermal Conductivity: >0.671W/m-K Impedance: Ging Time: 3min (25°C) Track Strength: 25Kg Strength of Connected Buildings: 1.5map Margin Coefficient: >5.1 Scatter Coefficient: Package Included:1 x Heatsink Plaster

• 
• 
• 

Atsauksmes