Preces apraksts

• Adjustable Magnetic Positioning The Magnetic Gauge Tool Camber Castor Strut Wheel Alignment Truck Car ToolFirst, the directions for use:1. Remove the four-wheel positioning sensor (clamp) and take away the tire;2. Carefully suck the magnetic point on the side of the brake wheel;3. Adjust the extent to zero;4. Install the required positioning particular parts;5. Use special instruments to adjust the location of the parts to the specified dimension attitude with assistance from the magnetic level indicator.6. If you discover a slight deviation with the locator, you just should fine-tune it at the bottom of the car. (Generally a bit of deviation won't cause positioning,Should be positioned in a horizontal position）Second, use:After using the four-wheel aligner to measure the data, for example, if the locator dimension information camber perspective is larger than the specified cost minus 1 degree, then you definitely should get rid of the site fixture, eradicate the tire, and replace the necessary four-wheel alignment special parts. You will want a magnetic level produced through our center. In the past, operators used their own experience to regulate the inclination, and sometimes there were errors. Using the level produced by means of our center, it may be precisely adjusted to the mandatory size angle.

• 
• 
• 
• 
• 

Atsauksmes