Tu tagad redzi preces, kas tiek piegādātas uz United States. Lai redzētu preces, kas tiek piegādas uz citām valstīm, izvēlies atbilstošu piegādes reģionu.
Features:
1 assist 5V voltage receiver, otherwise it might cause module harm If the receiver and servo use high-voltage system, please upload a way to the module voltage discount module
2 way servo signal input, control all of the manner electronic switch, normally open end support 20A latest
three The product has a power-on protection function, clean to operate, the enter channel doesn't must be calibrated, like minded with all brands of handheld remote control
4 Using fine materials, open design, easy to burn up warmth
five The product has quite a lot of applications, can control the power on and rancid of various electric appliances, such as navigation lights, searchlights, flash lights, buzzers, etc; management the digicam shutter, or change the camera's video and photo mode
Parameter:
Low voltage version:
The working voltage is 3, so the receiver voltage is 3, it is recommended to not exceed 5, in any other case it will be burned
High voltage version: the operating voltage is 5, appropriate for many receivers
Function Description
This distant change remotely controls the electric equipment on the mannequin aircraft by way of one of the switch channels on the remote control, and the 1-channel LED dynamically demonstrates the present switch popularity in real time, so that you can start quickly with out the desire for an operation guide This system doesn't require calibration and is precisely like minded with assorted manufacturers of remote control instruments
Instructions for use:
1 Plug the sign input cable into an idle receiver channel that corresponds to at least one of the switches on the remote control When related to the receiver, the ability indicator can be lit The working indicator lights up when the swap channel is open and the alternative is closed
2 Mode The red LED indicates the power indicator; the blue LED indicates the relay working fame
three Trigger the switch on the remote control (OFF->ON), the green LED lights up and the relay begins to work
Frequently Asked Questions:
1: Is the swap with output?
A: No output, only a single-pole double-throw switch, the gadget is one other energy supply, power delivery is what number of V output is how many V
2: What is the adaptation between digital change and relay?
A: The similar is a switch, relay current assist for extra (maximum help 20A) relay AC or DC can be, the electronic change can solely be related to DC power!
3: Is the change controlled by means of PWM responsibility cycle?
A: PWM is the task cycle, the use of air model PWM control, the period of 20 milliseconds, high point 1 to two milliseconds
4: What is the sign of this startup? How huge is the frame rate?
A: air model pwm signal: 1ms to one for state A, 1 to 2ms for state B, A change to B for open, B swap to A for close Normally open and usually closed, the receiver sends a signal, usually open and usually closed
5: Why the switch has been pink light, blue light is not?
A: PWM sign terminal problem, confirm that the PWM output (can take the servo tester tester) to look the quantity of journey is large enough, (the amount of journey adjusted to the maximum and try again)
6: can control the motor forward and reverse?
A: No, can only control on or off
7: can management multiple?
A: The change is at the moment only 1 way, a channel can only management all the technique to beginning and forestall the relay
8: I solely need to go the sign line, no longer the power line, can I?
A: The relay is just a switch, it is going to pass through the signal line
9: What is the utmost restrict of the relay?
A: Relay voltage and latest limit: 20A 24V DC, 20A 125V AC
10: Is the relay point-activated or self-locking?
A: This is the remote control settings, and the relay has nothing to do, the relay only deserve to swap the channel mannequin aviation PWM sign at the line!
Package include:
Aviation model switch *1