Preces apraksts

• MPPT/ PWM 80A/100A 12V 24V 36V 48V AUTO solar panel payment controller Solar PV Battery Charger with LCD Display Note:It is fine compatible MPPT + PWM Solar Controllers ,not 100% Ture MPPT Description: photo voltaic charge controller with essentially the most advanced MPPT control set of rules and the maximum energy level of the pv array can be quickly tracked in any surroundings in order that it will get the maximum energy from the solar panel and drastically improve the utilization of energy in photo voltaic system It can be utilized in communication base station, domestic energy supply system, site visitors light, solar avenue lamp, courtyard lamp systems, and many others Feature: 1 Advanced MPPT most energy point monitoring technology, the tracking efficiency isn't any lower than 99% 2 The LCD is designed to dynamically display the operation records and dealing fame of the package 3 Compatible with Seal, GEL, Flooded, LifePO4 battery charging four Dual USB 5V charging ports five 12V/24V/36V/48V computerized identity 6 Over-voltage protection 7 Over-current defense 8 Over temperature protection 9 7 forms of operating mode selection 10 Controller parameters exhibit (working mode, battery voltage, PV charging current, battery discharging current, product operating temperature, postpone time); 11 Some of the controller parameters would be modified by way of the user to set and save 12, with backlight exhibit 【7 kinds of working mode selection】 1 Charging mode: in any case, never discharge 2 Light control mode: when the controller detects nights, it'll put off ten mins then start to discharge; when it detects daytime, it'll postpone ten mins then quit discharging three Light and time postpone management mode: when the controller detects nights, it's going to postpone ten mins then start to discharge and rely down, if the timer stops through zero, discharge will quit The longest duration of put off is 23:59 four Universal management mode: below the trouble-free condition, it always keep discharging 5 Manual control mode: it uses “▼” for discharging or no longer 6 Timing management mode: it opens or closes the release continually 7 Test mode: it's the identical as light and time delay management mode but only loses ten mins of time postpone 8 The controller still discharges beneath low voltage protection Touch-holding “▼” for five seconds, discharge continues to output But discharge is barely stopped by way of hand Notice that this functionality could injury the battery, watch out with it! Controller parameter: MODEL:SY6048 Battery Voltage:12V/24V/36V/48V Auto Charging Current:60A Max Solar Input(Voc）:15-25V(12V Battery);30-50V(24V Battery);45-75V(36V Battery);60-100V(48V Battery) Maximum PV Input power:720W(12V Battery);1440W(24V Battery);2160W(36V Battery);2880W(48V Battery)

• 
• 
• 
• 
• 

Atsauksmes