Tu tagad redzi preces, kas tiek piegādātas uz United States. Lai redzētu preces, kas tiek piegādas uz citām valstīm, izvēlies atbilstošu piegādes reģionu.
ZN collection digital time relay counter▇ Model quantity and parameters
Model number
Input signal
External dimensions
Perforate dimensions
Related product
ZN48
Contact, sensor
48x48x91mm
461/0x46 1/0 mm
Visiting
ZN72
Contact, sensor
72x72x115 mm
681/0x68 1/0 mm
Order
▇ ZN48 counter mannequin quantity legendZN48Parent Model NumberSupply voltage-220VAC: 220VAC-110VAC: 110VAC-24V: 24V-12V: 12V-380VAC: 380VAC▇ General
Model number
ZN sequence
Supply voltage
36, 220, 380VAC 50/60 Hz; 12VAC/DC, 24VAC/DC
Operating mode
Single postpone (Up): 99/9999s//9999min/99min59s/99h59min out code: 1-6
Single put off (Down): 99/9999s//9999min/99min59s/99h59min out code: 1-6
Double put off (Up): 9999s/9999min/99min59s/99h59min out code: 1,2
Double postpone (Down): 9999s/9999min/99min59s/99h59min out code: 1,2
Accumulation (reset immediately): 99h59min59/999h59min59s/9999d23h59min out code: 1-6
Accumulation (reset after 8s): 99h59min59/999h59min59s/9999d23h59min out code: 1-6
Frequency: 9999Hz/999 out code: 1,3
Rotation: 60-9999RPM out code: 1,3
Frequency/Rotation: 0-9999 out code: 1,3 multiple: a,b
Reversible count: 0-9999 out code: 1,3,5
Reversible count: 0-9999 out code: 1,3,5 multiple: a
Reversible count: 0-99999999 out code: 1,3,5
Reversible count: 0-99999999 out code: 1,3,5 multiple: a
Output mode
1 When strength on, the counter work, reach or exceed the set value, relay turn on
2 When energy on, the counter don&;t work (can make it work via reset button or reset terminals), attain or exceed the set value, relay switch on
3 When power on, the counter work, reach or exceed the set value, relay switch off
four When power on, the counter don&;t paintings (can make it paintings through reset button or reset terminals), attain or exceed the set value, relay change off
5 When strength on, the counter work, attain or exceed the set value, relay change on, when reach to preset reset time, the counter reset automatically, start up paintings again
6 When strength on, the counter don&;t paintings paintings (can make it paintings by means of reset button or reset terminals), reach or exceed the set value, relay swap on, when attain to preset reset time, the counter reset automatically, initiate paintings back
Input Signal
Contact, sensor (NPN type)
Max counting velocity
10KHz
Control form
SPDT
Contact rating
5A@250Vac, 7A@24Vdc
Mechanical lifestyles
1x106
Electrical existence
1x105
Power intake
3W max
Setting system
Dial change
Indication formulation
8-segment 4-digital reveal
Counting error
≤1
Reset time
≥0
Power reset
≥1s
Dielectric power
2000Vac, 50/60Hz for 1min
Insulation resistance
100MΩ min at 500 VDC
Matched sensor
NPN type: M8 2mm Sn, M12 4mm Sn, M18 8mm Sn, M18 2m Sn
M30 4m Sn
Operating temperature
-10 to 50 °C
Operating humidity
30-85% RH max, non-condensing
Alias call
ZN sequence time relay, counting relay, frequency meter, tachometer
▇ ZN48 counter connected products
No
Model Number
Supply Voltage
Related Product
1
ZN48-220VAC(-110VAC, -24V, -12V, -380VAC)
220VAC; 110VAC; 24V; 12V; 380VAC
Visiting
Product manual: ZN collection digital time relay counter manual: www/att/comp/fl-en/relays/counters/ZN/ZN_en:If you are satisfied to our product and service, please leave a 5 megastar nice feedback, we very recognize it If not, please touch us first, we are able to try to resolve your difficulty