Beschreibung

• Normal Open 12V 24V Engine Flame Out Device Off Valve XHQ-PT- NO The appearance of regular shut and typical shut are the same, just difference: regular open stype:NC （）,When power on, it'll pull when power off, it's going to push regular close stype:NC （√）,when strength off ,it will pull When power on,it will push One: technical parameter The goal of operating voltage: 12V (9-15V DC) 24V (18-30V DC) Purpose: 12V-2 24V-1 (full of motion recent moves in position routinely disconnect the ability supply, the operating latest of <15mA) In the road of control working current: <15mA Travel: fifty three + 1mm The maximum tension: 90N An ambient temperature: -30 to 60 DEG C The motion time: less than 2 seconds An overload defense extinguisher: the burden is just too vast or stuck, quit operating automatically,avoid flameout device damage Disconnect the flexibility off after a era of time, re power,extinguisher from fault reset, can resume traditional work Two, flameout gadget wiring: The flameout machine has 3 lead wires, as follows: Red: join the fantastic power supply: the cathode of a power supply (yellow green or blue)as the line of control: Open type: management line energy extinguisher action, action in place, automated quit The release of extinguisher power, action in place, computerized quit Closed type: control line strength extinguisher action, action in place, computerized quit extinguisher strength control line, automatic quit action in place Three, installation and spot The set up and commissioning must make sure the extinguisher motion in position before,diesel engine stop control rod no motion to the restrict position and the extinguisher stuck,otherwise the extinguisher inside overload protection circuit, automatic flameout machine stops working, the extinguisher must disconnect the power, adjust the mounting position, back to the extinguisher on electricity, flameout which can resume typical work

• 
• 
• 
• 
• 

Rückmeldung