Beschreibung

• 1/5/10/20pcs Thermal Grease Paste Conductive Heatsink Plaster Viscous Adhesive Glue For Chip VGA RAM LED IC Cooler Radiator CoolDescription:1.It has high energy and quick bonding effect, and is acceptable for immediately attaching assorted components, LEDs and warmth sinks. 2.Good thermal conductivity, solid adhesion, vacuum packaging isn't smooth to oxidize and dry, nice viscosity, quick drying time. 3.It has good conductivity, broad working temperature fluctuate (-60~200°C), and momentary resistance to 300°C. 4.It has brief floor curing time, lengthy storage period, non-toxic, solvent-free, and might be safely utilized to elastic bonding, warmth dissipation, insulation and packaging of electronics, instruments, LEDs, heat sinks, etc. 5.Instructions: 1) Extrusion of the product straight throughout use, rubbing the outside of the adherend, and directly covering it after use, in case of trial back 2) The surface fixed speed is said to the relative humidity and temperature within the air; the higher the temperature, the quicker the curing speed, and vice versa. 3) Recommended thickness: 0.1-0.5mm, the thinner the better. 4) Please use solvent to clean the surface of the bonded object earlier than use (such as alcohol), avoid cleaning with detergent, and observe it after the skin is clean. 6.The equipment is sealing and the product is covered with a vacuum bag to insulate the air and develop the garage time.Specifications:Thermal properties, stable glue adhesion. Specifications: 5g (single) Melting amount: zero (200°C/24 Hours) Evaporation: 0.001% (200°C/24 Hours) Thermal Conductivity: >0.671W/m-K Impedance: Ging Time: 3min (25°C) Track Strength: 25Kg Strength of Connected Buildings: 1.5map Margin Coefficient: >5.1 Scatter Coefficient: Package Included:1 x Heatsink Plaster

• 
• 
• 

Rückmeldung