Beschreibung

• Note: No 3 pin is the common pin of the LED light, and the average pin of the LED light pin of the typical cathode wiring formulation needs to be connected to the (-) pole The usual pin of the LED lamp pin of the average anode wiring formula ought to be connected to the (+) pole NC: Normally closed NO: Normally open C: Switch regular terminal 3: LED normal terminal 2: Red LED 1: Green LED Switch type:power switch button Hole diameter:16mm Led color:red-green/red-orange-green Shell color:silver Operation method:Momentary self-reset/Latching self-locking Led Voltage:3-6V/12-24V/110-220V Maximum current:4A Waterproof level:IP66 Contact type:1NO1NC Due to handbook measurement, please enable slightly error Difference between Momentary self-reset and Latching self-locking: 1/Self-reset: When you press the button, press-key will robotically return(Like a automobile horn change it-power on, release it-power off) 2 self-locking: When you press the button, press-key will dwell in role until you press again then the press-key return(Like a light change it-power on, press it again-power off) Certificate Wiring Instructions 1 does the signal “C”、"NC" and "NO" means? " NC ": Normal Close " NO ": Normal Open " C " : Common Wiring Diagram NC: Normally closed NO: Normally open C: Switch common terminal 3: LED usual terminal 2: Red LED 1: Green LED “3” terminal related to the unfavorable pole 1: Normal status, green gentle on Press the switch, the purple mild is on “3” terminal connected to the unfavorable pole 2: Normal status, purple gentle on Press the switch, the green mild is on “3” terminal connected to the superb pole 1: Normal status, green light on Press the switch, the pink mild is on “3” terminal related to the positive pole 2: Normal status, red gentle on Press the switch, the golf green gentle is on

• 
• 
• 
• 
• 

Rückmeldung