Beschreibung

• Product DescriptionThe iron plated universal joint could be bent at any angle (rotation angle forty five degrees), and the universal joint can change the transmission route at any angle. Originally, a motor shaft faces south, and the direction of the rotating shaft would be changed to stand the ground by way of universal joint connection. It can isolate or take up axial vibration and impact, and has the plain benefits of enormous torque, small transmission inertia, broad adjustment angle, handy installation, wide utility range, long provider life, etc. It is acceptable for various events of general machinery.The following 3 sizes: outer diameter: 12mm, length: 52mm6-6: Aperture of one finish is 6mm, and that of the alternative end is 6mm; (M3 machine screw is used for side hole)5-5: Aperture of 1 end is 5mm, and that of the other finish is 5mm; (M3 mechanical device screw is used for side hole)4-4: Aperture of 1 end is 4mm, and that of the alternative end is 4mm; (M3 mechanical device screw is used for side hole)The following two sizes: length: 58mm, outer diameter of eight * eight is 14mm, and outer diameter of 10 * 10 is 16mm8-8: Aperture of one finish is 8mm, and that of the other finish is 8mm; (M4 machine screw is used for aspect hole)10-10: one facet hole diameter is 10mm, the other facet hole diameter is 10mm; (M4 mechanical device screw is used for facet hole)Packing instructions:According on your choice!

• 
• 
• 
• 

Rückmeldung