Beschreibung

• Product selling point: 1 Using nice materials, the quality is guaranteed 2 Photovoltaic photo voltaic fee and discharge automatic control switch, appropriate for a wide range of battery voltages three Simple and transportable to use 4 Charge through the day, robotically turn on the light when it's dark, and robotically turn off the light when it's brilliant 5 The low-power controller is appropriate for photo voltaic garden lights, lawn lights, colorful string lights, small avenue lights, and so on Features: Charging within the daytime, automatically turning at the lighting fixtures at night, and mechanically turning off the lighting at dawn, the output voltage is the output voltage when the battery has no voltage The circuit controls the output by detecting the change of the voltage generated by the photo voltaic panel, without the desire for photosensitive elements; it's appropriate for quite a lot of batteries Wiring method: 1+B- linked lithium battery 2 S+ S- connect to photo voltaic panel three L+L- output Wiring sequence: 1: Connect the lithium battery, the battery must have the corresponding protection board 2: Connect to the LED, the lithium battery has energy and the LED lights up 3: Connect to the photo voltaic panel At this time, the photo voltaic panel is illuminated with light, and the LED is off, and the LED is on with out light The change can be installed if it needs to be grew to become off at evening or the change interface SW has been reserved for transportation and storage Precautions: 1: The steady working output current of the management board can't be more than 600ma, in any other case it could trigger output defense 2: Charging and anti-backflow with out overcharge and overdischarge defense Lithium batteries should be used with corresponding defense forums (mobile phone batteries all have three protection, and more than 18650 don't have them three defense boards cannot be used in series) 3: Pay consideration to waterproofing and insulation 4: LED lamps cannot use enhance power 5: The battery voltage of the controller is the output voltage, limitless latest and voltage limiting, 2V3V LED lamp beads cannot be used directly, it needs to be driven through a step-down fixed recent or a chain latest proscribing resistor, and the output recent is the maximum operating current, now not fixed recent Special Note: 1: The output power is the actual power, please confirm the actual power intake of the weight earlier than use 2: Direct access to 3Vled may perhaps injury the controller or LED 3: The battery ought to be equipped with a protective plate, and the battery voltage should tournament the open circuit voltage of the solar panel Package list: Solar management swap circuit board*5

• 
• 
• 
• 
• 

Rückmeldung