Wir zeigen Dir Artikel, die nach United States geliefert werden. Um Artikel anzuzeigen, die in ein anderes Land geliefert werden, ändere bitte deine Lieferregion.
Number of intelligent counting functions (Model:S-1060)
Word counting, automatic alarm, loop
Can be set to three modes: automatic, manual, and regular
1、 Counting setting: Turn on the power, press "Set" and hold for 3 seconds, the light will flash, and press Λ ∨ to set the quantity, with any setting from 0 to 9999
2、 Automatic/manual setting: Press and hold "SET" for 3 seconds, the light flashes, and then press "SET" to select
"1" automatic mode, when the quantity of materials reaches the set torque, the alarm will automatically reset the count and enter the next cycle
"2" indicates manual mode. After the alarm is triggered, press the "∨" key to reset and enter the next cycle
"3", normal counting, no alarm function, press the ∨ key to reset and enter the next cycle
Widely applicable to various screws
The diameter of the screw is 1-5mm; The length of the screw is suitable for use with a minimum of 20mm
Smooth discharge and precise retrieval
Easier and more efficient removal of screws
Brush adjustment for smooth discharge
After the screw is poured into the material bin and turned on, the drum starts to rotate. Adjust the brush to be right on the nut side by side. If the screw is still horizontally discharged and stuck, the key is to readjust the height of the brush to adapt to it
Rail adjustment
The track can be freely adjusted, suitable for various M1.0-M5.0 standard screws, adjustable in length within 20MM
Transmission speed, adjustable
Freely set screw conveying speed, adjust screw feeding speed
Vibration force adjustment screw transmission speed knob
The vibration screw stops when it is in place, and the vibration extension time knob can be adjusted to extend the vibration.
The screw on the wheel stops when it is in place, and the wheel extension time knob can be adjusted to extend the feeding process.
The right warehouse door track needs to be opened for adjustment.
V-groove precise adjustment
The screws are precise in place and can adjust the front, back, left, right, up, and down positions of the V-shaped groove, enabling direct use of an electric batch for material retrieval without having to look at the screws, greatly improving work efficiency.
1 adjustable left and right fixing screws
2 adjustable upper and lower fixing screws
3 adjustable front and rear fixing screws
4 diamond block fixing screws