Beschreibung

• 1pcs L298N driving force board module L298 stepper motor clever automobile robotic breadboard peltier High Power Product Description:L298N Module name: dual H-bridge motor force module Main control chip: L298N Logic voltage: 5V Logic current: 0mA-36mA Storage temperature: -20°C to +135°C Weight: 30g Operating mode: H-bridge force (dual) Driving voltage: 5V-35V Driving current: 2A (MAX unmarried bridge) Power: 25W External Dimension: 43*43*27mm Product Features: ★ This module makes use of ST&;s L298N as the leading motive force chip, which is characterised by means of solid using ability, low heat technology and robust anti-interference ability ★ This module can use the built-in 78M05 by driving the power supply a part of the ability work, but with the intention to avoid harm to the voltage regulator chip, when utilizing greater than 12V power voltage, please use the external 5V common sense power delivery ★ This module makes use of high-capacity filter capacitors, continuous latest defense diodes, which might upgrade reliability Caution: 1 When your force voltage (the above diagram identifies 12V input, the particular appropriate input differ is 7-12V) is 7V-12V, you may enable the on-board 5V common sense energy supply, when utilizing the on-board 5V energy supply, the interface in the +5V When the on-board 5V delivery is used, the +5V delivery within the interface does not have to be input, but can draw out 5V for exterior use (This is a daily application!) 2 When the drive voltage is larger than 12V, lower than or equivalent to 24V (the chip manual can help as much as 35V, yet in keeping with the journey of the final 298 conservative utility voltage support) (The chip guide means that it's going to support as much as 35V, yet in keeping with experience, the overall 298 conservative software voltage help to 24V is already very impressive!) When, for example, to power the rated voltage of 18V, for example, to drive a motor with a rated voltage of 18V First, it is best to eliminate the jumper cap that permits the on-board 5V output Then the 5V output port is externally connected to the 5V enable 5V allow is a control sign with a degree of 5V When this signal input is valid, and the flexibility supply within the motor driving force module is normal, the motor motive force module will output latest Otherwise, even supposing the power supply is normal, there is not any current on the motor The voltage is supplied to the internal common sense circuit of L298N (This type is an unconventional software of high voltage drive!) Mini-L298N Description：Motor drive module is very suitable for use on battery-powered smart cars, toy cars, robots, etc, supply voltage 2V ~ 10V, can drive two DC motors or a 4-wire, 2-phase stepper motors at the identical time, could be realized within the ahead and reverse and velocity functions, the current of every circuit would be up to 1 sustained current, the peak latest of as much as 2, with thermal protection and can be automatically restored Product Parameters: 1、Dual-circuit H-bridge motor drive, can pressure two DC motors or one 4-wire two-phase stepping motor at the same time; 2, module energy supply voltage 2V-10V 3, Signal terminal enter voltage 1; 4, single-channel working current 1, peak current up to 2, low standby recent (less than 0); 5、Built-in anti-common-state conduction circuit, the motor aren't inadvertently operated when the input is suspended; 6、Built-in thermal protection circuit (TSD) with hysteresis effect, no need to stress about the motor jamming Precautions: 1 Reversing the nice and adverse poles of the power supply will definitely trigger circuit damage 2 Output to ground quick circuit or brief circuit output, as well as motor blocking, the chip may be thermally protected, yet within the case of close to or greater than 10V voltage and the height current is way greater than 2 may also trigger the chip burned

• 
• 
• 
• 
• 

Rückmeldung